https://bugzilla.kernel.org/show_bug.cgi?id=217965 --- Comment #41 from Eyal Lebedinsky (bugzilla@xxxxxxxxxxxxxx) --- OK, so how do I disable the stripe=640 that was automatically added? Is there a mount option to disable it? I would rather not futz with tune2fs. RE kernel build: I used to often do this maybe 30 years ago, but on a workstation, not on the server. The build I expect to be simple, but it is the risk of a bad patch that worries me. I would rather not do that. BTW, while you are looking at the cache issue, what are your thoughts on the fact that the array shows (iostat -x) a very high w_await when the members are much lower? Is it normal? Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz w/s wkB/s wrqm/s %wrqm w_await wareq-sz d/s dkB/s drqm/s %drqm d_await dareq-sz f/s f_await aqu-sz %util 16:04:08 md127 0.20 0.80 0.00 0.00 10.50 4.00 9.80 739.20 0.00 0.00 1495.44 75.43 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 14.66 4.51 16:04:08 sdb 2.30 187.20 44.50 95.09 30.74 81.39 6.80 345.20 79.70 92.14 29.72 50.76 0.00 0.00 0.00 0.00 0.00 0.00 0.60 14.33 0.28 1.26 16:04:08 sdc 1.90 138.80 32.80 94.52 16.63 73.05 6.60 295.60 67.50 91.09 13.06 44.79 0.00 0.00 0.00 0.00 0.00 0.00 0.60 11.33 0.12 1.05 16:04:08 sdd 2.30 194.40 46.30 95.27 3.70 84.52 2.90 138.80 32.00 91.69 3.34 47.86 0.00 0.00 0.00 0.00 0.00 0.00 0.60 4.67 0.02 0.54 16:04:08 sde 1.80 204.00 49.20 96.47 14.89 113.33 4.10 302.40 71.70 94.59 13.27 73.76 0.00 0.00 0.00 0.00 0.00 0.00 0.60 6.17 0.08 1.66 16:04:08 sdf 1.90 97.20 22.40 92.18 14.63 51.16 4.70 212.00 48.50 91.17 19.70 45.11 0.00 0.00 0.00 0.00 0.00 0.00 0.60 11.50 0.13 1.98 16:04:08 sdg 2.00 212.00 51.00 96.23 7.80 106.00 4.70 279.20 65.30 93.29 8.32 59.40 0.00 0.00 0.00 0.00 0.00 0.00 0.60 8.00 0.06 1.86 16:04:08 sdh 2.20 213.20 51.10 95.87 21.73 96.91 4.80 315.60 74.30 93.93 27.77 65.75 0.00 0.00 0.00 0.00 0.00 0.00 0.60 14.33 0.19 2.05 -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
