Re: [PATCHv1 2/9] ext4: Fixes ext4_mb_mark_bb() with flex_bg with fast_commit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/02/07 05:37PM, Jan Kara wrote:
> On Sat 05-02-22 19:39:51, Ritesh Harjani wrote:
> > In case of flex_bg feature (which is by default enabled), extents for
> > any given inode might span across blocks from two different block group.
> > ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
> > starting block group, but it fails to read it again when the extent length
> > boundary overflows to another block group. Then in this below loop it
> > accesses memory beyond the block group bitmap buffer_head and results
> > into a data abort.
> >
> > 	for (i = 0; i < clen; i++)
> > 		if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
> > 			already++;
> >
> > This patch adds this functionality for checking block group boundary in
> > ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
> > block group.
> >
> > w/o this patch, I was easily able to hit a data access abort using Power platform.
> >
> > <...>
> > [   74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
> > [   74.533214] EXT4-fs (loop3): shut down requested (2)
> > [   74.536705] Aborting journal on device loop3-8.
> > [   74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
> > [   74.703727] Faulting instruction address: 0xc0000000007bffb8
> > cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
> >     pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
> >     lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
> >     sp: c000000015db7300
> >    msr: 800000000280b033
> >    dar: c00000005e980000
> >  dsisr: 40000000
> >   current = 0xc000000027af6880
> >   paca    = 0xc00000003ffd5200   irqmask: 0x03   irq_happened: 0x01
> >     pid   = 5167, comm = mount
> > <...>
> > enter ? for help
> > [c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
> > [c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
> > [c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
> > [c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
> > [c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
> > [c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
> > [c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
> > [c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
> > [c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
> > [c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
> > [c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
> > [c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
> > [c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
> >
> > Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxx>
>
> Just two nits below. Otherwise feel free to add:
>
> Reviewed-by: Jan Kara <jack@xxxxxxx>
>
> > ---
> >  fs/ext4/mballoc.c | 131 +++++++++++++++++++++++++++-------------------
> >  1 file changed, 76 insertions(+), 55 deletions(-)
> >
> > diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> > index 2f117ce3bb73..d0bd51b1e1ad 100644
> > --- a/fs/ext4/mballoc.c
> > +++ b/fs/ext4/mballoc.c
> > @@ -3901,72 +3901,93 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
> >  	ext4_grpblk_t blkoff;
> >  	int i, err;
> >  	int already;
> > -	unsigned int clen, clen_changed;
> > +	unsigned int clen, clen_changed, thisgrp_len;
> >
> > -	clen = EXT4_NUM_B2C(sbi, len);
> > -
> > -	ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
> > -	bitmap_bh = ext4_read_block_bitmap(sb, group);
> > -	if (IS_ERR(bitmap_bh)) {
> > -		err = PTR_ERR(bitmap_bh);
> > -		bitmap_bh = NULL;
> > -		goto out_err;
> > -	}
> > -
> > -	err = -EIO;
> > -	gdp = ext4_get_group_desc(sb, group, &gdp_bh);
> > -	if (!gdp)
> > -		goto out_err;
> > +	while (len > 0) {
> > +		ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
> >
> > -	ext4_lock_group(sb, group);
> > -	already = 0;
> > -	for (i = 0; i < clen; i++)
> > -		if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
> > -			already++;
> > -
> > -	clen_changed = clen - already;
> > -	if (state)
> > -		ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
> > -	else
> > -		mb_test_and_clear_bits(bitmap_bh->b_data, blkoff, clen);
> > -	if (ext4_has_group_desc_csum(sb) &&
> > -	    (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) {
> > -		gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
> > -		ext4_free_group_clusters_set(sb, gdp,
> > -					     ext4_free_clusters_after_init(sb,
> > -						group, gdp));
> > -	}
> > -	if (state)
> > -		clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
> > -	else
> > -		clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
> > +		/*
> > +		 * Check to see if we are freeing blocks across a group
> > +		 * boundary.
> > +		 * In case of flex_bg, this can happen that (block, len) may
> > +		 * span across more than one group. In that case we need to
> > +		 * get the corresponding group metadata to work with.
> > +		 * For this we have goto again loop.
> > +		 */
> > +		thisgrp_len = min_t(unsigned int, (unsigned int)len,
> > +			EXT4_BLOCKS_PER_GROUP(sb) - EXT4_C2B(sbi, blkoff));
> > +		clen = EXT4_NUM_B2C(sbi, thisgrp_len);
> >
> > -	ext4_free_group_clusters_set(sb, gdp, clen);
> > -	ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
> > -	ext4_group_desc_csum_set(sb, group, gdp);
> > +		bitmap_bh = ext4_read_block_bitmap(sb, group);
> > +		if (IS_ERR(bitmap_bh)) {
> > +			err = PTR_ERR(bitmap_bh);
> > +			bitmap_bh = NULL;
> > +			break;
> > +		}
> >
> > -	ext4_unlock_group(sb, group);
> > +		err = -EIO;
> > +		gdp = ext4_get_group_desc(sb, group, &gdp_bh);
> > +		if (!gdp)
> > +			break;
> >
> > -	if (sbi->s_log_groups_per_flex) {
> > -		ext4_group_t flex_group = ext4_flex_group(sbi, group);
> > -		struct flex_groups *fg = sbi_array_rcu_deref(sbi,
> > -					   s_flex_groups, flex_group);
> > +		ext4_lock_group(sb, group);
> > +		already = 0;
> > +		for (i = 0; i < clen; i++)
> > +			if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) ==
> > +					 !state)
> > +				already++;
> >
> > +		clen_changed = clen - already;
> >  		if (state)
> > -			atomic64_sub(clen_changed, &fg->free_clusters);
> > +			ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
> >  		else
> > -			atomic64_add(clen_changed, &fg->free_clusters);
> > +			mb_test_and_clear_bits(bitmap_bh->b_data, blkoff, clen);
> > +		if (ext4_has_group_desc_csum(sb) &&
> > +		    (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT))) {
> > +			gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
> > +			ext4_free_group_clusters_set(sb, gdp,
> > +			     ext4_free_clusters_after_init(sb, group, gdp));
> > +		}
> > +		if (state)
> > +			clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
> > +		else
> > +			clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
> > +
> > +		ext4_free_group_clusters_set(sb, gdp, clen);
> > +		ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
> > +		ext4_group_desc_csum_set(sb, group, gdp);
> > +
> > +		ext4_unlock_group(sb, group);
> > +
> > +		if (sbi->s_log_groups_per_flex) {
> > +			ext4_group_t flex_group = ext4_flex_group(sbi, group);
> > +			struct flex_groups *fg = sbi_array_rcu_deref(sbi,
> > +						   s_flex_groups, flex_group);
> > +
> > +			if (state)
> > +				atomic64_sub(clen_changed, &fg->free_clusters);
> > +			else
> > +				atomic64_add(clen_changed, &fg->free_clusters);
> > +
> > +		}
> > +
> > +		err = ext4_handle_dirty_metadata(NULL, NULL, bitmap_bh);
> > +		if (err)
> > +			break;
> > +		sync_dirty_buffer(bitmap_bh);
> > +		err = ext4_handle_dirty_metadata(NULL, NULL, gdp_bh);
> > +		sync_dirty_buffer(gdp_bh);
> > +		if (err)
> > +			break;
> > +
> > +		block += thisgrp_len;
> > +		len = len - thisgrp_len;
> 		^^^ Maybe: len -= thisgrp_len;
>
> > +		put_bh(bitmap_bh);
> 		^^ brelse() would be more usual here...

Sure, will make above two changes.

Btw, any general rules of when should we use put_bh() v/s brelse()?

Assumption about why I used put_bh() above was that in a non-error loop, where
we are doing ext4_read_block_bitmap() (which will return bh with b_count
elevated), I thought, we could simply do put_bh() in the end.

But when there is a possibility of an error occurred somewhere in
between, then it's safe to do brelse().

-ritesh

>
>
> 								Honza
> --
> Jan Kara <jack@xxxxxxxx>
> SUSE Labs, CR



[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux