Re: [PATCH 8/9] e2scrub_all: refactor device probe loop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 20, 2019 at 10:02:17PM -0400, Theodore Ts'o wrote:
> From: "Darrick J. Wong" <darrick.wong@xxxxxxxxxx>
> 
> Paul Menzel reported that the e2scrub_all reaper service that runs at
> startup takes a long time to run, and Ted Ts'o pointed out that we could
> do a lot less work by using lvs as the outer loop in the ext4 filesystem
> probe function so that we only have to lsblk the lvm devices containing
> ext4 filesystems.
> 
> Therefore, refactor the loops to put lvs first, which should boost speed
> a bit.
> 
> [ Made some of the further optimizations suggested by Lukas Czerner.  -- TYT ]
> 
> Reported-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> Signed-off-by: Theodore Ts'o <tytso@xxxxxxx>
> ---
>  scrub/e2scrub_all.in | 34 +++++++++++++++++++++++-----------
>  1 file changed, 23 insertions(+), 11 deletions(-)
> 
> diff --git a/scrub/e2scrub_all.in b/scrub/e2scrub_all.in
> index 4cb90a0de..cad232987 100644
> --- a/scrub/e2scrub_all.in
> +++ b/scrub/e2scrub_all.in
> @@ -22,6 +22,7 @@ PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
>  
>  scrub_all=0
>  snap_size_mb=256
> +reap=0
>  conffile="@root_sysconfdir@/e2scrub.conf"
>  
>  test -f "${conffile}" && . "${conffile}"
> @@ -65,7 +66,7 @@ exitcode() {
>  while getopts "nrAV" opt; do
>  	case "${opt}" in
>  	"n") DBG="echo Would execute: " ;;
> -	"r") scrub_args="${scrub_args} -r";;
> +	"r") scrub_args="${scrub_args} -r"; reap=1;;
>  	"A") scrub_all=1;;
>  	"V") print_version; exitcode 0;;
>  	*) print_help; exitcode 2;;
> @@ -88,9 +89,12 @@ if ! type lvcreate >& /dev/null ; then
>  fi
>  
>  # Find scrub targets, make sure we only do this once.
> -ls_scrub_targets() {
> -	lsblk -o NAME,FSTYPE,MOUNTPOINT -p -P -n | while read vars; do
> +ls_scan_targets() {
> +	lvs --name-prefixes -o vg_name,lv_path \
> +			-S lv_active=active,lv_role=public --noheadings | \
> +	while read vars; do
>  		eval "${vars}"
> +		eval "$(lsblk -o FSTYPE,MOUNTPOINT -p -P -n "${LVM2_LV_PATH}")"

Btw, I know that you're going to change and resend this, but there is
another problem. You're missing NAME field and so the check that we have
later

 93 →       →       if [ -n "${MOUNTPOINT}" ]; then
 94 →       →       →       echo "${MOUNTPOINT}"
 95 →       →       else
 96 →       →       →       echo "${NAME}"
 97 →       →       fi

will never print the device name.

It almost feels like we need some regression testing for this ;) However
I agree that it's going to be PITA to create since historically our test
suite did not require elevated privledges, nor did it change the system
in any way.

I could bring some knowledge over from ssm and try to avoid system
changes by using loop devices and DM_DEV_DIR, but it will still require
a root privledges and will be significantly different from what we do in
tests/ today. Any ideas on how you want to do this ?

-Lukas


>  
>  		# Skip non-ext[234]
>  		case "${FSTYPE}" in
> @@ -103,12 +107,6 @@ ls_scrub_targets() {
>  			continue;
>  		fi
>  
> -		# Skip non-lvm devices and lvm snapshots
> -		lvm_vars="$(lvs --nameprefixes -o vg_name,lv_name,lv_role --noheadings "${NAME}" 2> /dev/null)"
> -		test $? -ne 0 && continue
> -		eval "${lvm_vars}"
> -		echo "${LVM2_LV_ROLE}" | grep -q "snapshot" && continue
> -
>  		free_space="$(vgs -o vg_free --units m --noheadings --no-suffix "${LVM2_VG_NAME}" 2> /dev/null | sed -e 's/\..*//')"
>  		test "${snap_size_mb}" -gt "${free_space}" && continue
>  
> @@ -120,6 +118,20 @@ ls_scrub_targets() {
>  	done | sort | uniq
>  }
>  
> +# Find leftover scrub snapshots
> +ls_reap_targets() {
> +	lvs -o lv_path -S lv_role=snapshot -S lv_name=~\(e2scrub$\) --noheadings
> +}
> +
> +# Figure out what we're targeting
> +ls_targets() {
> +	if [ "${reap}" -eq 1 ]; then
> +		ls_reap_targets
> +	else
> +		ls_scan_targets
> +	fi
> +}
> +
>  # systemd doesn't know to do path escaping on the instance variable we pass
>  # to the e2scrub service, which breaks things if there is a dash in the path
>  # name.  Therefore, do the path escaping ourselves if needed.
> @@ -140,10 +152,10 @@ escape_path_for_systemd() {
>  
>  # Scrub any mounted fs on lvm by creating a snapshot and fscking that.
>  stdin="$(realpath /dev/stdin)"
> -ls_scrub_targets | while read tgt; do
> +ls_targets | while read tgt; do
>  	# If we're not reaping and systemd is present, try invoking the
>  	# systemd service.
> -	if [ -z "${scrub_args}" ] && type systemctl > /dev/null 2>&1; then
> +	if [ "${reap}" -ne 1 ] && type systemctl > /dev/null 2>&1; then
>  		tgt_esc="$(escape_path_for_systemd "${tgt}")"
>  		${DBG} systemctl start "e2scrub@${tgt_esc}" 2> /dev/null < "${stdin}"
>  		res=$?
> -- 
> 2.19.1
> 



[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux