On Mon, 7 Jul 2008, Holger Kiehl wrote:
On Thu, 19 Jun 2008, Theodore Tso wrote:
On Wed, Jun 18, 2008 at 05:58:00AM +0000, Holger Kiehl wrote:
For afdbench: 5336.41 files per second 15.63 MiB/s
So it seems that for afdbench the ext4-patch-queue is a slowdown.
Can you remind me where afdbench can be downloaded? And if I remember
correctly, it creates and deletes large numbers of small files,
correct?
It would be interesting to see which new feature introduced by the
ext4 patch queue --- probably dellayed allocation or mballoc --- is
responsible for the slowdown. One or the other (or both) can be
disabled by mounting the filesystem (using a kernel with the ext4
patch queue) with the mount options -O nomballoc or -O nodelalloc.
If it turns out that nomballoc restores the speed for afdbench, for
example, then it will tell us where we need to look more closely.
Ideally we would not want to have one mount option needed to optimize
filesystem operations for large amoutns of modifications to small
files, and another mode of operation when mostly writing to large
files. So if you could do a round of tests using the ext4 patch queue
kernel, with -O nomballoc and -O nodelalloc (and if both seem to
improve things, try "-O nomballoc,nodelalloc" and see if you get back
to the pre-ext4 patch queue speed), it would be very much appreciated.
Here the results:
+---------+------------+
| afdbench| bonnie++ |
+---------+--------+---+
|file rate| block w|%CP|
-------------------------------------+---------+--------+---+
ext3 | 5536.79 | 212350 | 92|
ext4-patch-queue | 5054.86 | 244384 | 50|
ext4-patch-queue-nodelalloc | 4943.78 | 225819 | 92|
ext4-patch-queue-nomballoc | 3123.49 | 244535 | 52|
ext4-patch-queue-nomballoc-nodelalloc| 4931.09 | 231332 | 91|
-------------------------------------+---------+--------+---+
Test where done with 2.6.26-rc8 and
ext4-patch-queue-52c8a02a8a7b7e5915b9301e9c171b4faf22b928.tar.gz,
e2fsprogs is from git (27th April 2008). ext4 filesystem was created
with 'mke2fs -m 0 -t ext4dev /dev/md7' and ext3 'mke2fs -m 0 -j /dev/md7'.
Common mount options are: noatime,nodiratime,commit=15
Looking at the afdbench results I also notice that when I just take
the FTP results the results look as follows:
ext3 : 3465.50
ext4-patch-queue : 2785.58
ext4-patch-queue-nodelalloc : 2677.39
ext4-patch-queue-nomballoc : 219.12
ext4-patch-queue-nomballoc-nodelalloc: 2566.24
Now one can see the drop with ext4-patch-queue much clearer. The testing
of afdbench is done in two parts, one where we just link lots of small
files locally and the same test is then repeated using a network protocol
in this case FTP. So the difference is that for the filesystem lots
of new files get created. Further testing showed that when I increase
the number FTP process performance decreases in all cases but much more
for ext4-patch-queue (nearly 50% drop against ext3) as the following results
show:
ext3 : 2352.89
ext4-patch-queue : 1226.55
ext4-patch-queue-nodelalloc : 1340.80
ext4-patch-queue-nomballoc-nodelalloc: 1181.12
I did not do the ext4-patch-queue-nomballoc test since there is obviously
something wrong here when you look at the numbers above (219.12 fps).
During that test I notice that when you try to open an existing file
with vi it can take several minutes before it opens this file. The strange
thing is that vi was not in D-state but it could not be killed, even root
could not kill it with -9.
There is also some corruption in filesystem during the test with
ext4-patch-queue and ext4-patch-queue-nomballoc. It happens when after
the test I umount the test filesystem and then mount it again the
following message appears:
root@athena:~# umount /home
root@athena:~# mount /home
mount: wrong fs type, bad option, bad superblock on /dev/md7,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
EXT4-fs: ext4_check_descriptors: Inode bitmap for group 256 not in group
(block 117835012)!<3>EXT4-fs: group descriptors corrupted!
Using fsck this problem could be corrected. Now that one does not think I
did those test on a corrupted file system. The filesystem was newly created
for each of the above five test runs.
Any ideas what I can do to help find why performance under load is nearly
halved and the group descriptor corruption?
I did try newer patch queue (ext4-patch-queue-a5d48915447f44c3af6ce8e1c91d45b452977fcf)
from today, but I immediatly hit an oops as soon as I untar a file, see below.
Thanks,
Holger
kjournald2 starting. Commit interval 15 seconds
EXT4 FS on md7, internal journal
EXT4-fs: mounted filesystem with ordered data mode.
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
------------[ cut here ]------------
kernel BUG at fs/ext4/extents.c:1817!
invalid opcode: 0000 [1] SMP
CPU 0
Modules linked in: w83627hf lm85 hwmon_vid bonding nf_conntrack_ftp ipt_REJECT xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables binfmt_misc floppy i2c_amd756 i2c_core k8temp ohci_hcd sg button usbcore
Pid: 2757, comm: tar Not tainted 2.6.26-rc9 #1
RIP: 0010:[<ffffffff802e2722>] [<ffffffff802e2722>] ext4_ext_get_blocks+0x9eb/0xde1
RSP: 0018:ffff81007a0f99b8 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff81002cfd69c0 RCX: ffff81002cfd69a8
RDX: ffff81007f48c6fc RSI: 00000000ffffffff RDI: ffff81002cfd69c0
RBP: ffff81007a0f9b88 R08: ffff81007f48c6fc R09: 0000000000000000
R10: 000000000000a855 R11: 0000000000000000 R12: ffff81007f48c7b0
R13: 0000000000000001 R14: ffff81007f48c7b0 R15: 0000000000000001
FS: 00007f66afd3b780(0000) GS:ffffffff80570000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000081d000 CR3: 00000001e9e86000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process tar (pid: 2757, threadinfo ffff81007a0f8000, task ffff81007d9110e0)
Stack: ffff81007d36c300 000000007f46e030 ffff81007a0f9b88 0000000000000001
000000012c815bc0 ffff81007f46e030 ffff81002cfd69c0 000000007d36c300
ffff81007a0f9bb8 ffff81007f48c6f0 000000007a0f9bc8 ffff81007f46e030
Call Trace:
[<ffffffff802d2aaa>] ? ext4_mark_inode_dirty+0x134/0x147
[<ffffffff80223c42>] ? __wake_up+0x38/0x4f
[<ffffffff802d4e0b>] ? ext4_get_blocks_wrap+0x70/0x165
[<ffffffff8031af55>] ? __up_read+0x13/0x8a
[<ffffffff802d5280>] ? ext4_getblk+0x62/0x170
[<ffffffff802d7801>] ? add_dirent_to_buf+0xcb/0x2ec
[<ffffffff802d539b>] ? ext4_bread+0xd/0x5f
[<ffffffff802d7206>] ? ext4_append+0x3a/0x88
[<ffffffff802d8042>] ? ext4_add_entry+0x620/0x87f
[<ffffffff802d12ce>] ? ext4_new_inode+0xc4e/0xc78
[<ffffffff802f58f3>] ? start_this_handle+0x2c7/0x370
[<ffffffff802d8916>] ? ext4_add_nondir+0x18/0x4e
[<ffffffff802d8ff8>] ? ext4_create+0xc2/0x105
[<ffffffff802d9288>] ? ext4_lookup+0x97/0xc1
[<ffffffff802823d6>] ? vfs_create+0x75/0xba
[<ffffffff80284e5d>] ? do_filp_open+0x1e4/0x7f6
[<ffffffff80279e7e>] ? sys_chown+0x5c/0x6b
[<ffffffff80279684>] ? do_sys_open+0x46/0xca
[<ffffffff8020b16b>] ? system_call_after_swapgs+0x7b/0x80
Code: 39 44 24 24 72 2f 66 81 fa 00 80 0f b7 c2 76 05 2d 00 80 00 00 48 8b 7c 24 30 01 f0 89 44 24 24 e8 71 d3 ff ff 3b 44 24 24 75 04 <0f> 0b eb fe 2b 44 24 24 eb 11 0f 0b eb fe c7 44 24 24 00 00 00
RIP [<ffffffff802e2722>] ext4_ext_get_blocks+0x9eb/0xde1
RSP <ffff81007a0f99b8>
---[ end trace e595ecd19e9f2f92 ]---
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
