On Thu, Jun 02, 2022 at 01:36:56PM +0200, Hans Schultz wrote:
> On tor, jun 02, 2022 at 13:39, Ido Schimmel <idosch@xxxxxxxxxx> wrote:
> > On Thu, Jun 02, 2022 at 01:30:06PM +0300, Nikolay Aleksandrov wrote:
> >> On 02/06/2022 13:17, Hans Schultz wrote:
> >> > On tor, jun 02, 2022 at 12:33, Nikolay Aleksandrov <razor@xxxxxxxxxxxxx> wrote:
> >> >> On 02/06/2022 12:17, Hans Schultz wrote:
> >> >>> On tis, maj 31, 2022 at 17:23, Ido Schimmel <idosch@xxxxxxxxxx> wrote:
> >> >>>> On Tue, May 31, 2022 at 11:34:21AM +0200, Hans Schultz wrote:
> >> >
> >> >>> Another issue is that
> >> >>> bridge fdb add MAC dev DEV master static
> >> >>> seems to add the entry with the SELF flag set, which I don't think is
> >> >>> what we would want it to do or?
> >> >>
> >> >> I don't see such thing (hacked iproute2 to print the flags before cmd):
> >> >> $ bridge fdb add 00:11:22:33:44:55 dev vnet110 master static
> >> >> flags 0x4
> >> >>
> >> >> 0x4 = NTF_MASTER only
> >> >>
> >> >
> >> > I also get 0x4 from iproute2, but I still get SELF entries when I look
> >> > with:
> >> > bridge fdb show dev DEV
> >> >
> >>
> >> after the above add:
> >> $ bridge fdb show dev vnet110 | grep 00:11
> >> 00:11:22:33:44:55 master virbr0 static
>
> >
> > I think Hans is testing with mv88e6xxx which dumps entries directly from
> > HW via ndo_fdb_dump(). See dsa_slave_port_fdb_do_dump() which sets
> > NTF_SELF.
> >
> > Hans, are you seeing the entry twice? Once with 'master' and once with
> > 'self'?
> >
>
> Well yes, but I get some additional entries with 'self' for different
> vlans. So from clean adding a random fdb entry I get 4 entries on the
> port, 2 with 'master' and two with 'self'.
> It looks like this:
>
> # bridge fdb add 00:22:33:44:55:66 dev eth6 master static
> # bridge fdb show dev eth6 | grep 55
> 00:22:33:44:55:66 vlan 1 master br0 offload static
> 00:22:33:44:55:66 master br0 offload static
These two entries are added by the bridge driver ('master' is set). You
get two entries because you didn't specify a VLAN, so one entry is
installed with VLAN 0 (no VLAN) and the second is installed because VLAN
1 is configured on eth6.
> 00:22:33:44:55:66 vlan 1 self static
This entry is from the HW. It corresponds to the first entry above.
> 00:22:33:44:55:66 vlan 4095 self static
I assume you are using VLAN 4095 for untagged traffic, so this entry
probably corresponds to the second entry above.
>
> If I do a replace of a locked entry I only get one with the 'self' flag.
IIUC, your driver is adding the entry to the bridge and with a specific
VLAN. So you have one entry reported by the bridge driver and a
corresponding entry in HW.
