From: Amit Cohen <amcohen@xxxxxxxxxx> et_vlan field is used to configure which EtherType is used when VLAN is pushed at ingress (for untagged packets or for QinQ push mode). It will be used to configure tagging with ether_type1 (i.e., 0x88A8) for QinQ mode. Signed-off-by: Amit Cohen <amcohen@xxxxxxxxxx> Reviewed-by: Petr Machata <petrm@xxxxxxxxxx> Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx> --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 5248532c3999..bea919b92f76 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -834,6 +834,17 @@ MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8); */ MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8); +/* reg_spvid_et_vlan + * EtherType used for when VLAN is pushed at ingress (for untagged + * packets or for QinQ push mode). + * 0: ether_type0 - (default) + * 1: ether_type1 + * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2 + * Ethertype IDs are configured by SVER. + * Access: RW + */ +MLXSW_ITEM32(reg, spvid, et_vlan, 0x04, 16, 2); + /* reg_spvid_pvid * Port default VID * Access: RW -- 2.28.0
