From: Amit Cohen <amcohen@xxxxxxxxxx>
SPVC configures the port to identify packets as untagged / single tagged /
double tagged packets based on the packet EtherTypes.
It will be used to classify 802.1q packets as untagged and 802.1ad packets
as tagged when received by ports member in a 802.1ad bridge.
Signed-off-by: Amit Cohen <amcohen@xxxxxxxxxx>
Reviewed-by: Petr Machata <petrm@xxxxxxxxxx>
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 99 +++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index fcf9095b3f55..5248532c3999 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1857,6 +1857,104 @@ static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port,
}
}
+/* SPVC - Switch Port VLAN Classification Register
+ * -----------------------------------------------
+ * Configures the port to identify packets as untagged / single tagged /
+ * double packets based on the packet EtherTypes.
+ * Ethertype IDs are configured by SVER.
+ */
+#define MLXSW_REG_SPVC_ID 0x2026
+#define MLXSW_REG_SPVC_LEN 0x0C
+
+MLXSW_REG_DEFINE(spvc, MLXSW_REG_SPVC_ID, MLXSW_REG_SPVC_LEN);
+
+/* reg_spvc_local_port
+ * Local port.
+ * Access: Index
+ *
+ * Note: applies both to Rx port and Tx port, so if a packet traverses
+ * through Rx port i and a Tx port j then port i and port j must have the
+ * same configuration.
+ */
+MLXSW_ITEM32(reg, spvc, local_port, 0x00, 16, 8);
+
+/* reg_spvc_inner_et2
+ * Vlan Tag1 EtherType2 enable.
+ * Packet is initially classified as double VLAN Tag if in addition to
+ * being classified with a tag0 VLAN Tag its tag1 EtherType value is
+ * equal to ether_type2.
+ * 0: disable (default)
+ * 1: enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, inner_et2, 0x08, 17, 1);
+
+/* reg_spvc_et2
+ * Vlan Tag0 EtherType2 enable.
+ * Packet is initially classified as VLAN Tag if its tag0 EtherType is
+ * equal to ether_type2.
+ * 0: disable (default)
+ * 1: enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, et2, 0x08, 16, 1);
+
+/* reg_spvc_inner_et1
+ * Vlan Tag1 EtherType1 enable.
+ * Packet is initially classified as double VLAN Tag if in addition to
+ * being classified with a tag0 VLAN Tag its tag1 EtherType value is
+ * equal to ether_type1.
+ * 0: disable
+ * 1: enable (default)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, inner_et1, 0x08, 9, 1);
+
+/* reg_spvc_et1
+ * Vlan Tag0 EtherType1 enable.
+ * Packet is initially classified as VLAN Tag if its tag0 EtherType is
+ * equal to ether_type1.
+ * 0: disable
+ * 1: enable (default)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, et1, 0x08, 8, 1);
+
+/* reg_inner_et0
+ * Vlan Tag1 EtherType0 enable.
+ * Packet is initially classified as double VLAN Tag if in addition to
+ * being classified with a tag0 VLAN Tag its tag1 EtherType value is
+ * equal to ether_type0.
+ * 0: disable
+ * 1: enable (default)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, inner_et0, 0x08, 1, 1);
+
+/* reg_et0
+ * Vlan Tag0 EtherType0 enable.
+ * Packet is initially classified as VLAN Tag if its tag0 EtherType is
+ * equal to ether_type0.
+ * 0: disable
+ * 1: enable (default)
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvc, et0, 0x08, 0, 1);
+
+static inline void mlxsw_reg_spvc_pack(char *payload, u8 local_port, bool et1,
+ bool et0)
+{
+ MLXSW_REG_ZERO(spvc, payload);
+ mlxsw_reg_spvc_local_port_set(payload, local_port);
+ /* Enable inner_et1 and inner_et0 to enable identification of double
+ * tagged packets.
+ */
+ mlxsw_reg_spvc_inner_et1_set(payload, 1);
+ mlxsw_reg_spvc_inner_et0_set(payload, 1);
+ mlxsw_reg_spvc_et1_set(payload, et1);
+ mlxsw_reg_spvc_et0_set(payload, et0);
+}
+
/* CWTP - Congetion WRED ECN TClass Profile
* ----------------------------------------
* Configures the profiles for queues of egress port and traffic class
@@ -11212,6 +11310,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
MLXSW_REG(svpe),
MLXSW_REG(sfmr),
MLXSW_REG(spvmlr),
+ MLXSW_REG(spvc),
MLXSW_REG(cwtp),
MLXSW_REG(cwtpm),
MLXSW_REG(pgcr),
--
2.28.0
