Hi All,
i want my wlan0 added automatically to br0 on my Debian Squeeze Server.
At the moment the ports eth[1-3] are running over br0. I am using kernel
3.2.9. The port eth0 is only for internet. eth[1-3] are for my local
network at home. When i manually add wlan0 to br0 i can built up a
communication between my laptop and my server. Therfore i execute the
command <brctl addif br0 wlan0> on my server.
Here are some configs:
/etc/network/interfaces
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
address 192.168.0.186
netmask 255.255.255.0
broadcast 192.168.0.255
bridge_ports eth1 eth2 eth3 wlan0
bridge_ageing 300
bridge_fd 1
# Mapping to DSL- oder DHCP-Router
mapping eth0
...
/etc/default/hostapd
DAEMON_CONF="/etc/hostapd.conf"
/etc/hostapd.conf
interface=wlan0
bridge=br0
driver=nl80211
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=1
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=fortress
country_code=DE
hw_mode=g
channel=1
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=2
wpa_passphrase=PASSWORT
wpa_key_mgmt=WPA-PSK WPA-EAP
wpa_pairwise=TKIP CCMP
rsn_pairwise=CCMP
<brctl showstp br0> only shows the ports eth[1-3] when i try to add
wlan0 with </etc/network/interfaces> start-script. Any idea?
regards Markus
_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/bridge
