Hello Guys,
I am trying to configure bridge + bonding with arp monitoring enabled.
Whenever I activate the bridge interface and assign bond0 to the bridge
Everything stops working.
I am on ubuntu 10.04 LTS.
Can I have an ip address in the bond0 interface WHILE not having an IP
address in the bridge interface? In order to have bond arp monitoring I
must have an ip address in the bond interface as far as I understand.
Here it is my current configuration.
PS: I have seen similar configurations although none of them have an ip
address configured in the bond0 interface.
# The loopback network interface
auto lo
iface lo inet loopback
auto bond0
iface bond0 inet static
address 10.153.107.110
netmask 255.255.255.0
gateway 10.153.107.1
bond-slaves none
bond-mode active-backup
bond_arp_ip_target 10.153.107.1
bond_arp_interval 500
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0 eth1
auto eth1
iface eth1 inet manual
bond-master bond0
bond-primary eth0 eth1
auto br0
iface br0 inet manual
bridge_ports bond0
bridge_stp off
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_maxwait 0
Leonardo
_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/bridge
