But, when I add eth0 to bridge_ports, it doesn't work any longer
That and this are your problem:
eth1 Link encap:Ethernet HWaddr 00:15:00:1f:20:a6
inet6 addr: fe80::215:ff:fe1f:20a6/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1RX packets:3 errors:79 dropped:79 overruns:0 frame:0
All those dropped packets on receive... your wireless card isn't accepting packets with other destination MAC addresses. And when you add eth0 into the bridge, Linux must be choosing eth0's MAC address as the bridge address.
Since bridging works in Windows, your card is capable of doing this with the right configuration. But I don't know what to suggest trying next.
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge