Thanks Stepen, again, and sorry for my english, perhaps is this the
problem too: my english.
I want to set port prio, to values as 1, 2, 3, 4, etc.. (little values),
my problem is that when I run:
brctl setportprio br0 eth1 3
That "3" goes to "port cost" no goes into "port priority", that is my
problem.
Any help more?
Stephen Hemminger escribió:
> On Wed, 31 May 2006 13:01:56 +0200
> Samuel Díaz García <samueldg at arcoscom.com> wrote:
>
>> Thanks Stephen.
>>
>> The problem is I want to set the port prio, not the cost. The cost is
>> working (at least brctl showstp br0 shows fine, gg).
>>
>> Would work with ..../port_prio too?
>
> You know that port_prio is limited to 6 bits now that bridge can have up
> to 1024 ports.
>
--
Samuel Díaz García
Director Gerente
ArcosCom Wireless, S.L.L.
CIF: B11828068
c/ Romero Gago, 19
Arcos de la Frontera
11630 - Cadiz
http://www.arcoscom.com
mailto:samueldg at arcoscom.com
msn: samueldg at arcoscom.com
Móvil: 651 93 72 48
Tlfn.: 956 70 13 15
Fax: 956 70 34 83
