Hey All
Thanks - I have gotten the 1.1 brctl to build and its installed and the server
rebooted.
NAT is still in its un-working state using iptables and NAT rules that run
normally without the bridge.
I understand that firewalling/bridging and in turn, NAT is really something
that should not happen. But my question is: Can Fedora C4 and iptables 1.3
along with the newest bridging code provide for a NAT solution on a 2 NIC
gateway/router/bridge/firewall ???
If not - any suggestions?
Logs show that the br0 interface is getting the traffic destined for the NAT'd
machines, so its apparent that adding the newest bridge with the old iptables
rules does not do the trick.
Log excerpt:
May 30 18:10:34 gw-ccfo kernel: IPT FORWARD packet died: IN=eth0 OUT=br0
PHYSOUT=eth1 SRC=XXX.XXX.105.11 DST=192.168.68.200 LEN=66 TOS=0x00 PREC=0x00
TTL=60 ID=60954 DF PROTO=TCP SPT=80 DPT=3665 WINDOW=8576 RES=0x00 ACK PSH
URGP=0
IPTABLES basic NAT rule:
iptables -t nat -A PREROUTING -d XXX.194.217.191 -p tcp \
-j DNAT --to 192.168.68.200
iptables -t nat -A PREROUTING -d XXX.194.217.191 -p udp \
-j DNAT --to 192.168.68.200
iptables -t nat -A POSTROUTING -s 192.168.68.200 -o $EXTIF \
-j SNAT --to-source XXX.194.217.191
Thanks in advance for any help.
Regards,
Jerome
--
FRWS WebMail (http://www.frws.com)
Cause you deserve Spam and Virus free email...
