Grant Likely wrote: > On Thu, Aug 14, 2008 at 1:20 PM, Behan Webster <behanw@xxxxxxxxxxxxxxx> wrote: > >> Grant Likely wrote: >> >>> On Thu, Aug 14, 2008 at 8:35 AM, Behan Webster <behanw@xxxxxxxxxxxxxxx> wrote: >>> >>> >>>> Grant Likely wrote: >>>> >>>> >>>>> Also, when booting on something like a 5200 with an uncommon serial >>>>> ports name (ttyPSC0), I had to manually add the /dev/ttyPSC0 device >>>>> file before it would boot. >>>>> >>>>> >>>>> >>>> You're using an older version then. The latest (v1.2) allows you to >>>> specify the serial port/baud rate when running the tool. >>>> >>>> >>> Hmm, I can only find v1.1.2 on your website. >>> >>> >> Version 1.1.2 of elbs contains v1.2 of the rootfs tool. I suppose I >> should Sync the version numbers on a release. >> > > Okay, then I've still got a problem. I did specify the serial port > when running it, and the files in /etc were all set correctly. It was > just the /dev/ttyPSC0 device file which was missing I see. I thought MAKEDEV would have done that for you. It appears that MAKEDEV doesn't support ttyPSC0. Yes, I suppose then you would have to make that dev file manually... Best laid plans... -- Behan Webster behanw@xxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
