Re: [GIT PULL] EFI stub loading support for RISC-V

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Apr 2020 10:57:48 PDT (-0700), atishp@xxxxxxxxxxxxxx wrote:
On Sun, Apr 26, 2020 at 12:52 PM Atish Patra <atishp@xxxxxxxxxxxxxx> wrote:

On Sat, Apr 25, 2020 at 12:31 PM Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
>
> Palmer,
>
> As discussed, below are the changes for v5.8 that can be taken via the
> RISC-V tree to implement booting RISC-V Linux from EFI firmware.
>
> You can fetch and merge the signed tag directly, or merge 22090f84bc3f80
> and cherry pick the 4 patches on top of it, if you see any need to do so
> (but please use a topic branch in that case)
>
> Please be aware (as is noted in the tag) that these changes are really
> the bare minimum that is needed to launch the kernel from EFI firmware.
> In the current state, you may be able to boot from Uboot in EFI mode,
> but Tianocore based boot will not work at all, unless you convert the
> EFI memory map back to DT memory nodes in the firmware implementation,
> and I can assure you that that is not something that will be accepted in
> upstream Tianocore.
>
> So in summary, this is unfinished work, and I can only recommend merging
> these changes once there is a plan in place to complete the implementation.
>

I have started looking into this part. My initial plan was to start
looking into it right after I got
the boot time services working but other things took priority. Thanks
for your review and
suggestion throughout the process. I will coordinate with Abner/Daniel
to test RISC-V UEFI
runtime services(once implemented)  with tianocore.
> --
> Ard.
>
>
> The following changes since commit 22090f84bc3f8081e0ec180ccaedc85820085376:
>
>   efi/libstub: unify EFI call wrappers for non-x86 (2020-04-23 20:15:06 +0200)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git tags/riscv-efi-for-v5.8
>
> for you to fetch changes up to 66b4ac6b9dd1fdbb8ac7a1f20a8d08066368245d:
>
>   RISC-V: Add EFI stub support. (2020-04-25 13:59:54 +0200)
>
> ----------------------------------------------------------------
> EFI stub loading support for RISC-V
>
> This branch implements support for loading the RISC-V Linux kernel
> straight from EFI firmware, by adding PE/COFF metadata to the kernel
> image and incorporating the kernel's EFI stub.
>
> Note that this is the *bare* minimum that is needed to boot from EFI
> firmware. The following pieces are still missing at this point, and
> will be required for full interoperability with generic EFI firmware:
> - using the EFI memory map instead of the device tree to populate the
>   memblock tables
> - parsing and handling of generic EFI configuration tables (such as
>   SMBIOS), as well as architecture specific ones that may be defined
>   for RISC-V
> - runtime mapping of EFI runtime services memory and MMIO regions, and
>   support for EFI runtime services (get/set time, get/set variable, reset
>   system)
>
> ----------------------------------------------------------------
>
> Cc: Atish Patra <atish.patra@xxxxxxx>
> Cc: Palmer Dabbelt <palmer@xxxxxxxxxxx>
> Cc: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
> Cc: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
> Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx
>
> Atish Patra (4):
>       include: pe.h: Add RISC-V related PE definition
>       RISC-V: Define fixmap bindings for generic early ioremap support
>       RISC-V: Add PE/COFF header for EFI stub
>       RISC-V: Add EFI stub support.
>
>  arch/riscv/Kconfig                        |  22 ++++++
>  arch/riscv/Makefile                       |   1 +
>  arch/riscv/configs/defconfig              |   1 +
>  arch/riscv/include/asm/Kbuild             |   1 +
>  arch/riscv/include/asm/efi.h              |  33 +++++++++
>  arch/riscv/include/asm/fixmap.h           |  18 +++++
>  arch/riscv/include/asm/io.h               |   1 +
>  arch/riscv/include/asm/sections.h         |  13 ++++
>  arch/riscv/kernel/Makefile                |   4 ++
>  arch/riscv/kernel/efi-header.S            | 100 +++++++++++++++++++++++++++
>  arch/riscv/kernel/head.S                  |  16 +++++
>  arch/riscv/kernel/image-vars.h            |  53 +++++++++++++++
>  arch/riscv/kernel/vmlinux.lds.S           |  22 +++++-
>  drivers/firmware/efi/Kconfig              |   3 +-
>  drivers/firmware/efi/libstub/Makefile     |  10 +++
>  drivers/firmware/efi/libstub/riscv-stub.c | 109 ++++++++++++++++++++++++++++++
>  include/linux/pe.h                        |   3 +
>  17 files changed, 407 insertions(+), 3 deletions(-)
>  create mode 100644 arch/riscv/include/asm/efi.h
>  create mode 100644 arch/riscv/include/asm/sections.h
>  create mode 100644 arch/riscv/kernel/efi-header.S
>  create mode 100644 arch/riscv/kernel/image-vars.h
>  create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c



--
Regards,
Atish

Hi Palmer,
There were few build errors for all-yes config and nommu reported by
0-day tests.
As some of the fixes require to add some dummy declarations for efi
runtime related functions,
Ard suggested that we should drop the series for now and merge with
full uefi support later.

OK, I'll wait for another patch set.  That makes my life a bit easier as well,
as we don't have to do the multi-tree merge in a single release.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux