The CPER parser assumes that the class code is big endian, but at least
on this edk2-derived Intel Purley platform it's little endian:
efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843
DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017
{1}[Hardware Error]: device_id: 0000:5d:00.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x5e
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030
{1}[Hardware Error]: class_code: 000406
^^^^^^ (should be 060400)
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
---
drivers/firmware/efi/cper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index addf0749dd8b..b1af0de2e100 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -381,7 +381,7 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx,
pcie->device_id.vendor_id, pcie->device_id.device_id);
p = pcie->device_id.class_code;
- printk("%s""class_code: %02x%02x%02x\n", pfx, p[0], p[1], p[2]);
+ printk("%s""class_code: %02x%02x%02x\n", pfx, p[2], p[1], p[0]);
}
if (pcie->validation_bits & CPER_PCIE_VALID_SERIAL_NUMBER)
printk("%s""serial number: 0x%04x, 0x%04x\n", pfx,
--
2.20.1
