ping...
On 2019/7/26 9:43, Xiaofei Tan wrote:
> AER info of PCIe fatal error is not printed in the current driver.
> Because APEI driver will panic directly for fatal error, and can't
> run to the place of printing AER info.
>
> An example log is as following:
> {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
> {763}[Hardware Error]: event severity: fatal
> {763}[Hardware Error]: Error 0, type: fatal
> {763}[Hardware Error]: section_type: PCIe error
> {763}[Hardware Error]: port_type: 0, PCIe end point
> {763}[Hardware Error]: version: 4.0
> {763}[Hardware Error]: command: 0x0000, status: 0x0010
> {763}[Hardware Error]: device_id: 0000:82:00.0
> {763}[Hardware Error]: slot: 0
> {763}[Hardware Error]: secondary_bus: 0x00
> {763}[Hardware Error]: vendor_id: 0x8086, device_id: 0x10fb
> {763}[Hardware Error]: class_code: 000002
> Kernel panic - not syncing: Fatal hardware error!
>
> This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
> cper_print_aer() call out of interrupt context")'. To fix this issue,
> this patch adds print of AER info in cper_print_pcie() for fatal error.
>
> Here is the example log after this patch applied:
> {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
> {24}[Hardware Error]: event severity: fatal
> {24}[Hardware Error]: Error 0, type: fatal
> {24}[Hardware Error]: section_type: PCIe error
> {24}[Hardware Error]: port_type: 0, PCIe end point
> {24}[Hardware Error]: version: 4.0
> {24}[Hardware Error]: command: 0x0546, status: 0x4010
> {24}[Hardware Error]: device_id: 0000:01:00.0
> {24}[Hardware Error]: slot: 0
> {24}[Hardware Error]: secondary_bus: 0x00
> {24}[Hardware Error]: vendor_id: 0x15b3, device_id: 0x1019
> {24}[Hardware Error]: class_code: 000002
> {24}[Hardware Error]: aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
> {24}[Hardware Error]: aer_uncor_severity: 0x00062010
> {24}[Hardware Error]: TLP Header: 000000c0 01010000 00000001 00000000
> Kernel panic - not syncing: Fatal hardware error!
>
> Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
> Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
> Reviewed-by: James Morse <james.morse@xxxxxxx>
> ---
> drivers/firmware/efi/cper.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 8fa977c..78b8922 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -390,6 +390,21 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
> printk(
> "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
> pfx, pcie->bridge.secondary_status, pcie->bridge.control);
> +
> + /* Fatal errors call __ghes_panic() before AER handler prints this */
> + if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO &&
> + gdata->error_severity & CPER_SEV_FATAL) {
> + struct aer_capability_regs *aer;
> +
> + aer = (struct aer_capability_regs *)pcie->aer_info;
> + printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
> + pfx, aer->uncor_status, aer->uncor_mask);
> + printk("%saer_uncor_severity: 0x%08x\n",
> + pfx, aer->uncor_severity);
> + printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
> + aer->header_log.dw0, aer->header_log.dw1,
> + aer->header_log.dw2, aer->header_log.dw3);
> + }
> }
>
> static void cper_print_tstamp(const char *pfx,
>
--
thanks
tanxiaofei
