[PATCH 4.14 345/496] x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sai Praneeth <sai.praneeth.prakhya@xxxxxxxxx>

[ Upstream commit 162ee5a8ab49be40d253f90e94aef712470a3a24 ]

Linus reported the following boot warning:

  WARNING: CPU: 0 PID: 0 at arch/x86/include/asm/tlbflush.h:134 load_new_mm_cr3+0x114/0x170
  [...]
  Call Trace:
  switch_mm_irqs_off+0x267/0x590
  switch_mm+0xe/0x20
  efi_switch_mm+0x3e/0x50
  efi_enter_virtual_mode+0x43f/0x4da
  start_kernel+0x3bf/0x458
  secondary_startup_64+0xa5/0xb0

... after merging:

  03781e40890c: x86/efi: Use efi_switch_mm() rather than manually twiddling with %cr3

When the platform supports PCID and if CONFIG_DEBUG_VM=y is enabled,
build_cr3_noflush() (called via switch_mm()) does a sanity check to see
if X86_FEATURE_PCID is set.

Presently, build_cr3_noflush() uses "this_cpu_has(X86_FEATURE_PCID)" to
perform the check but this_cpu_has() works only after SMP is initialized
(i.e. per cpu cpu_info's should be populated) and this happens to be very
late in the boot process (during rest_init()).

As efi_runtime_services() are called during (early) kernel boot time
and run time, modify build_cr3_noflush() to use boot_cpu_has() all the
time. As suggested by Dave Hansen, this should be OK because all CPU's have
same capabilities on x86.

With this change the warning is fixed.

( Dave also suggested that we put a warning in this_cpu_has() if it's used
  early in the boot process. This is still work in progress as it affects
  MCE. )

Reported-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@xxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxx>
Cc: Lee Chun-Yi <jlee@xxxxxxxx>
Cc: Matt Fleming <matt@xxxxxxxxxxxxxxxxxxx>
Cc: Michael S. Tsirkin <mst@xxxxxxxxxx>
Cc: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Ravi Shankar <ravi.v.shankar@xxxxxxxxx>
Cc: Ricardo Neri <ricardo.neri@xxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: linux-efi@xxxxxxxxxxxxxxx
Link: http://lkml.kernel.org/r/1522870459-7432-1-git-send-email-sai.praneeth.prakhya@xxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/x86/include/asm/tlbflush.h |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -131,7 +131,12 @@ static inline unsigned long build_cr3(pg
 static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
 {
 	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
-	VM_WARN_ON_ONCE(!this_cpu_has(X86_FEATURE_PCID));
+	/*
+	 * Use boot_cpu_has() instead of this_cpu_has() as this function
+	 * might be called during early boot. This should work even after
+	 * boot because all CPU's the have same capabilities:
+	 */
+	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
 	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux