On Wed, Apr 26, 2017 at 3:43 AM, Baoquan He <bhe@xxxxxxxxxx> wrote:
>
> This bug will cause SGI uv 100 boot failure since SGI uv 100 can only
> use efi old_map because of hardware. On rhel it failed all SGI uv series
> since we haven't back ported fix for SGI uv 200/300.
>
> On 04/26/17 at 06:39pm, Baoquan He wrote:
> > For EFI with old_map enabled, Kernel will panic when kaslr is enabled.
> >
> > The root cause is the ident mapping is not built correctly in this case.
> >
> > For nokaslr kernel, PAGE_OFFSET is 0xffff880000000000 which is PGDIR_SIZE
> > aligned. We can borrow the pud table from direct mapping safely. Given a
> > physical address X, we have pud_index(X) == pud_index(__va(X)). However,
> > for kaslr kernel, PAGE_OFFSET is PUD_SIZE aligned. For a given physical
> > address X, pud_index(X) != pud_index(__va(X)). We can't only copy pgd entry
> > from direct mapping to build ident mapping, instead need copy pud entry
> > one by one from direct mapping.
> >
> > So fix it in this patch.
Thanks for looking into this!
> >
> > The panic message is like below, an emty PUD or a wrong PUD.
> >
> > [ 0.233007] BUG: unable to handle kernel paging request at 000000007febd57e
> > [ 0.233899] IP: 0x7febd57e
> > [ 0.234000] PGD 1025a067
> > [ 0.234000] PUD 0
> > [ 0.234000]
> > [ 0.234000] Oops: 0010 [#1] SMP
> > [ 0.234000] Modules linked in:
> > [ 0.234000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc8+ #125
> > [ 0.234000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
> > [ 0.234000] task: ffffffffafe104c0 task.stack: ffffffffafe00000
> > [ 0.234000] RIP: 0010:0x7febd57e
> > [ 0.234000] RSP: 0000:ffffffffafe03d98 EFLAGS: 00010086
> > [ 0.234000] RAX: ffff8c9e3fff9540 RBX: 000000007c4b6000 RCX: 0000000000000480
> > [ 0.234000] RDX: 0000000000000030 RSI: 0000000000000480 RDI: 000000007febd57e
> > [ 0.234000] RBP: ffffffffafe03e40 R08: 0000000000000001 R09: 000000007c4b6000
> > [ 0.234000] R10: ffffffffafa71a40 R11: 20786c6c2478303d R12: 0000000000000030
> > [ 0.234000] R13: 0000000000000246 R14: ffff8c9e3c4198d8 R15: 0000000000000480
> > [ 0.234000] FS: 0000000000000000(0000) GS:ffff8c9e3fa00000(0000) knlGS:0000000000000000
> > [ 0.234000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 0.234000] CR2: 000000007febd57e CR3: 000000000fe09000 CR4: 00000000000406b0
> > [ 0.234000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [ 0.234000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > [ 0.234000] Call Trace:
> > [ 0.234000] ? efi_call+0x58/0x90
> > [ 0.234000] ? printk+0x58/0x6f
> > [ 0.234000] efi_enter_virtual_mode+0x3c5/0x50d
> > [ 0.234000] start_kernel+0x40f/0x4b8
> > [ 0.234000] ? set_init_arg+0x55/0x55
> > [ 0.234000] ? early_idt_handler_array+0x120/0x120
> > [ 0.234000] x86_64_start_reservations+0x24/0x26
> > [ 0.234000] x86_64_start_kernel+0x14c/0x16f
> > [ 0.234000] start_cpu+0x14/0x14
> > [ 0.234000] Code: Bad RIP value.
> > [ 0.234000] RIP: 0x7febd57e RSP: ffffffffafe03d98
> > [ 0.234000] CR2: 000000007febd57e
> > [ 0.234000] ---[ end trace d4ded46ab8ab8ba9 ]---
> > [ 0.234000] Kernel panic - not syncing: Attempted to kill the idle task!
> > [ 0.234000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
> >
> > Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
> > Signed-off-by: Dave Young <dyoung@xxxxxxxxxx>
> > Cc: Matt Fleming <matt@xxxxxxxxxxxxxxxxxxx>
> > Cc: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
> > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> > Cc: x86@xxxxxxxxxx
> > Cc: linux-efi@xxxxxxxxxxxxxxx
> > ---
> > arch/x86/platform/efi/efi_64.c | 35 +++++++++++++++++++++++++++--------
> > 1 file changed, 27 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
> > index 2ee7694..2e7baff 100644
> > --- a/arch/x86/platform/efi/efi_64.c
> > +++ b/arch/x86/platform/efi/efi_64.c
> > @@ -71,11 +71,12 @@ static void __init early_code_mapping_set_exec(int executable)
> >
> > pgd_t * __init efi_call_phys_prolog(void)
> > {
> > - unsigned long vaddress;
> > + unsigned long vaddr, left_vaddr;
> > + unsigned int num_entries;
> > pgd_t *save_pgd;
> > -
> > - int pgd;
> > + pud_t *pud, *pud_k;
> > int n_pgds;
> > + int i;
> >
> > if (!efi_enabled(EFI_OLD_MEMMAP)) {
> > save_pgd = (pgd_t *)read_cr3();
> > @@ -88,10 +89,22 @@ pgd_t * __init efi_call_phys_prolog(void)
> > n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
> > save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
> >
> > - for (pgd = 0; pgd < n_pgds; pgd++) {
> > - save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
> > - vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
> > - set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
> > + for (i = 0; i < n_pgds; i++) {
> > + save_pgd[i] = *pgd_offset_k(i * PGDIR_SIZE);
> > +
> > + vaddr = (unsigned long)__va(i * PGDIR_SIZE);
> > + pud = pud_alloc_one(NULL, 0);
Please check if pud is NULL.
> > +
> > + num_entries = PTRS_PER_PUD - pud_index(vaddr);
> > + pud_k = pud_offset(pgd_offset_k(vaddr), vaddr);
> > + memcpy(pud, pud_k, num_entries);
> > + if (pud_index(vaddr) > 0) {
You are using pud_index(vaddr) 3 times, might be worth using a local variable.
> > + left_vaddr = vaddr + (num_entries * PUD_SIZE);
> > + pud_k = pud_offset(pgd_offset_k(left_vaddr),
> > + left_vaddr);
> > + memcpy(pud + num_entries, pud_k, pud_index(vaddr));
I think this section (or the overall for loop) would benefit with a
comment explaining explaining why you are shifting the new PUD like
this.
> > + }
> > + pgd_populate(NULL, pgd_offset_k(i * PGDIR_SIZE), pud);
> > }
> > out:
> > __flush_tlb_all();
> > @@ -106,6 +119,8 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
> > */
> > int pgd_idx;
> > int nr_pgds;
> > + pud_t *pud;
> > + pgd_t *pgd;
> >
> > if (!efi_enabled(EFI_OLD_MEMMAP)) {
> > write_cr3((unsigned long)save_pgd);
> > @@ -115,8 +130,12 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
> >
> > nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
> >
> > - for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++)
> > + for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) {
> > + pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE);
> > + pud = (pud_t *)pgd_page_vaddr(*pgd);
> > + pud_free(NULL, pud);
> > set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]);
> > + }
> >
> > kfree(save_pgd);
> >
> > --
> > 2.5.5
> >
--
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
