Hi You could try using the "card=" option when loading the kernel module and use the cardnumber of a similar supported saa7134 dvb card. you can find a complete list of supported card saa713 dvb cards in "Documentation/video4linux/CARDLIST.saa7134". Cheers Chatura On Sat, May 23, 2009 at 6:42 AM, <jhmoodie@xxxxxxxxxxxx> wrote: > Does anyone have any information on the support status of this card? Or > perhaps any hints I might try to get it working? > > I have built and installed the latest V4L-DVB kernel driver modules, but > no luck. > > I noticed windows installs Philips 3xhybrid drivers if this helps... > > Product website: > http://www.gigabyte.com.tw/Products/TVCard/Products_Spec.aspx?ClassValue=TV+Card&ProductID=2757&ProductName=GT-P8000 > > Tuner NXP 18271 > Decoder NXP 7131E > > lspci -vnn: > 00:09.0 Multimedia controller [0480]: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1) > Subsystem: Giga-byte Technology Device [1458:9004] > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at e6000000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Kernel driver in use: saa7134 > Kernel modules: saa7134 > > dmesg output: > [ 3089.801191] saa7130/34: v4l2 driver version 0.2.15 loaded > [ 3089.801419] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 11, > latency: 32, mmio: 0xe6000000 > [ 3089.801443] saa7133[0]: subsystem: 1458:9004, board: UNKNOWN/GENERIC > [card=0,autodetected] > [ 3089.801656] saa7133[0]: board init: gpio is 40000 > [ 3089.952088] saa7133[0]: i2c eeprom 00: 58 14 04 90 54 20 1c 00 43 43 > a9 > 1c 55 d2 b2 92 > [ 3089.952125] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952153] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff > 00 > b3 ff ff ff ff > [ 3089.952180] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952206] saa7133[0]: i2c eeprom 40: 50 35 00 c0 96 10 05 32 d5 15 > 0e > 00 ff ff ff ff > [ 3089.952233] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952260] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952287] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952314] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952340] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952367] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952394] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952421] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952447] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952474] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.952501] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff > ff > ff ff ff ff ff > [ 3089.953430] saa7133[0]: registered device video0 [v4l2] > [ 3089.953507] saa7133[0]: registered device vbi0 > [ 3090.023006] saa7134 ALSA driver for DMA sound loaded > [ 3090.023158] saa7133[0]/alsa: saa7133[0] at 0xe6000000 irq 11 > registered > as card -2 > > -- > > raincloud@xxxxxxxxxxx > > -- > http://www.fastmail.fm - Email service worth paying for. Try it for free > > > _______________________________________________ > linux-dvb users mailing list > For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
