Am Montag, den 04.05.2009, 22:13 +0200 schrieb Charles: > On Fri, May 1, 2009 at 2:26 AM, hermann pitton <hermann-pitton@xxxxxxxx> wrote: > > Hi Charles, > > > > Am Donnerstag, den 30.04.2009, 13:54 +0200 schrieb Charles: > >> Hello, > >> > >> > >> I installed my Terratec Cinergy HT PCI DVB-T board on Ubuntu 9.04 > > > > I guess HT PCI can mean a lot, like My Cinema, WinFast and the like ... > > > >> using your tutorial > >> (http://www.linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers) > >> and when trying to scan transponders, no result was found: > >> > >> $ ls -l /dev/dvb/adapter0 > >> total 0 > >> crw-rw----+ 1 root video 212, 1 2009-04-30 12:19 demux0 > >> crw-rw----+ 1 root video 212, 2 2009-04-30 12:19 dvr0 > >> crw-rw----+ 1 root video 212, 0 2009-04-30 12:19 frontend0 > >> crw-rw----+ 1 root video 212, 3 2009-04-30 12:19 net0 > >> > >> $ scan /usr/share/dvb/dvb-t/fr-Nantes > >> scanning /usr/share/dvb/dvb-t/fr-Nantes > >> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > >> initial transponder 498000000 0 2 9 3 1 0 0 > >> initial transponder 506000000 0 2 9 3 1 0 0 > >> initial transponder 522000000 0 2 9 3 1 0 0 > >> initial transponder 530000000 0 2 9 3 1 0 0 > >> initial transponder 658000000 0 2 9 3 1 0 0 > >> initial transponder 802000000 0 2 9 3 1 0 0 > > > > Can't tell offhand if the zl10353 eventually has this problem too, which > > is well known on the tda10046. > > > > Please try to add plus 167 kHz to your initial scan file for Nantes, > > like you can see it here for one of the Lyon transmitters. > > [snip] > > Hi Hermann, > > Thank you. I added 167Khz to the scan file but it didn't solve my problem: > > > $ scan /usr/share/dvb/dvb-t/fr-Nantes > scanning /usr/share/dvb/dvb-t/fr-Nantes > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 498167000 0 2 9 3 1 0 0 > initial transponder 506167000 0 2 9 3 1 0 0 > initial transponder 522167000 0 2 9 3 1 0 0 > initial transponder 530167000 0 2 9 3 1 0 0 > initial transponder 658167000 0 2 9 3 1 0 0 > initial transponder 802167000 0 2 9 3 1 0 0 > >>> tune to: 498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > >>> tune to: 506167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 506167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > >>> tune to: 522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > >>> tune to: 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > >>> tune to: 658167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 658167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > >>> tune to: 802167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE > WARNING: >>> tuning failed!!! > >>> tune to: 802167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) > WARNING: >>> tuning failed!!! > ERROR: initial tuning failed > dumping lists (0 services) > Done. > $ > > > Any other idea? Not really. Which HT PCI it is, copy/paste relevant parts of "dmesg". If it is not a known issue with a certain card/driver, I would assume the signal is too poor. Cheers, Hermann _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
