it seems the driver is running
I just copied an pasted all from
budget_ci.c to budget.c
budget_core 18052 1 budget
saa7146 24584 2 budget,budget_core
ttpci_eeprom 10240 1 budget_core
dvb_core 94336 2 budget,budget_core
i2c_core 31892 7 i2c_dev,isl6423,stv6110x,stv090x,budget,budget_core,ttpci_eeprom
eading channels from file '/root/.szap/channels.conf'
zapping to 10 'MFTS E2E':
sat 0, frequency = 10861 MHz H, symbolrate 22000000, vpid = 0x0000, apid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal ff9c | snr 0000 | ber 0000000a | unc fffffffe |
status 1e | signal ff9c | snr 0000 | ber 0000000a | unc fffffffe | FE_HAS_LOCK
status 1e | signal ff9c | snr 0000 | ber 0000000a | unc fffffffe | FE_HAS_LOCK
patches attached
cheers markus
--
Neu: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate + Telefonanschluss für nur 17,95 Euro/mtl.!* http://dslspecial.gmx.de/freedsl-surfflat/?ac=OM.AD.PD003K11308T4569a
--- budget.c.orig 2009-04-16 19:39:36.000000000 +0200
+++ budget.c 2009-04-16 20:04:31.000000000 +0200
@@ -47,6 +47,11 @@
#include "bsru6.h"
#include "bsbe1.h"
#include "tdhd1.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "isl6423.h"
+
+
static int diseqc_method;
module_param(diseqc_method, int, 0444);
@@ -401,6 +406,49 @@
}
+static struct stv090x_config tt1600_stv090x_config = {
+ .device = STV0903,
+ .demod_mode = STV090x_SINGLE,
+ .clk_mode = STV090x_CLK_EXT,
+
+ .xtal = 27000000,
+ .address = 0x68,
+ .ref_clk = 27000000,
+
+ .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED,
+ .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+ .repeater_level = STV090x_RPTLEVEL_16,
+
+ .tuner_init = NULL,
+ .tuner_set_mode = NULL,
+ .tuner_set_frequency = NULL,
+ .tuner_get_frequency = NULL,
+ .tuner_set_bandwidth = NULL,
+ .tuner_get_bandwidth = NULL,
+ .tuner_set_bbgain = NULL,
+ .tuner_get_bbgain = NULL,
+ .tuner_set_refclk = NULL,
+ .tuner_get_status = NULL,
+};
+
+static struct stv6110x_config tt1600_stv6110x_config = {
+ .addr = 0x60,
+ .refclk = 27000000,
+};
+
+
+
+static struct isl6423_config tt1600_isl6423_config = {
+ .current_max = SEC_CURRENT_515m,
+ .curlim = SEC_CURRENT_LIM_ON,
+ .mod_extern = 1,
+ .addr = 0x08,
+};
+
+
+
+
static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
{
u8 val;
@@ -475,6 +523,50 @@
}
break;
+
+ case 0x101c: { /* TT S2-1600 */
+ struct stv6110x_devctl *ctl;
+ /* TODO! must verify with Andreas */
+ saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
+ msleep(50);
+ saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
+ msleep(250);
+
+ budget->dvb_frontend = dvb_attach(stv090x_attach,
+ &tt1600_stv090x_config,
+ &budget->i2c_adap,
+ STV090x_DEMODULATOR_0);
+
+ if (budget->dvb_frontend) {
+
+ ctl = dvb_attach(stv6110x_attach,
+ budget->dvb_frontend,
+ &tt1600_stv6110x_config,
+ &budget->i2c_adap);
+
+ tt1600_stv090x_config.tuner_init = ctl->tuner_init;
+ tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode;
+ tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
+ tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
+ tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+ tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+ tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain;
+ tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain;
+ tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk;
+ tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status;
+
+ dvb_attach(isl6423_attach,
+ budget->dvb_frontend,
+ &budget->i2c_adap,
+ &tt1600_isl6423_config);
+
+ } else {
+ dvb_frontend_detach(budget->dvb_frontend);
+ budget->dvb_frontend = NULL;
+ }
+ }
+ break;
+
case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
{
int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
@@ -641,22 +733,24 @@
MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
static struct pci_device_id pci_tbl[] = {
- MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
- MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
- MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
- MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
- MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
- MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
- MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
- MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
- MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
- MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
+ MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
+ MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
+ MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
+ MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+ MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
+ MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
+ MAKE_EXTENSION_PCI(ttbs1401,0x13c2, 0x1018),
+ MAKE_EXTENSION_PCI(fsacs1, 0x1131, 0x4f60),
+ MAKE_EXTENSION_PCI(fsacs0, 0x1131, 0x4f61),
+ MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
+ MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
{
.vendor = 0,
}
--- budget-ci.c.orig 2009-04-16 19:39:25.000000000 +0200
+++ budget-ci.c 2009-04-16 20:04:39.000000000 +0200
@@ -57,9 +57,12 @@
#include "bsru6.h"
#include "tda1002x.h"
#include "tda827x.h"
+
+/*
#include "stv6110x.h"
#include "stv090x.h"
#include "isl6423.h"
+*/
/*
* Regarding DEBIADDR_IR:
@@ -1357,6 +1360,7 @@
.refclock = 27000000,
};
+#if 0
static struct stv090x_config tt1600_stv090x_config = {
.device = STV0903,
.demod_mode = STV090x_SINGLE,
@@ -1394,6 +1398,7 @@
.mod_extern = 1,
.addr = 0x08,
};
+#endif
static void frontend_init(struct budget_ci *budget_ci)
{
@@ -1514,6 +1519,7 @@
}
break;
+#if 0
case 0x101c: { /* TT S2-1600 */
struct stv6110x_devctl *ctl;
/* TODO! must verify with Andreas */
@@ -1556,6 +1562,7 @@
}
}
break;
+#endif
}
@@ -1648,7 +1655,7 @@
MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
-MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
+//MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
@@ -1659,7 +1666,7 @@
MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
- MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
+ //MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
{
.vendor = 0,
}
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
