Hi there, I´m playing with a satelco easywatch card (or should be... ) and it works very nicely with a lot of channels and transponders. But there are two transponders (309mhz and 321hz) where the video and sound skips a lot, or dont work/lock at all. Another person had reported the same problem on IRC today. Perhaps this issue is somewhat related to the thread " TechnoTrend C-1501 - Locking issues on 388Mhz". Here is the dmesg: [ 2.819472] Linux video capture interface: v2.00 [ 2.830678] saa7146: register extension 'budget_av'. [ 2.830770] budget_av 0000:00:00.0: enabling device (0000 -> 0002) [ 2.831231] saa7146: found saa7146 @ mem ffffc20000024000 (revision 1, irq 16) (0x1894,0x0022). [ 2.831244] saa7146 (0): dma buffer size 192512 [ 2.831251] DVB: registering new adapter (KNC1 DVB-C MK3) [ 2.867975] adapter failed MAC signature check [ 2.867986] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 3.071061] budget_av: saa7113_init(): saa7113 not found on KNC card [ 3.131338] KNC1-0: MAC addr = 00:09:d6:6d:9f:db [ 3.338376] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 3.340258] budget-av: ci interface initialised. the list of good transponders are: 129, 135, 465, 525, 531, 537, 555, 585, and 591 any hints? -- Christian Lyra PoP-PR/RNP _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
