Hello, i've bought some months ago a Sattelite-Card called FlyDVB-S with an empty EEPROM! Chip: SAA7130HL Tuner: SU1278/SHA In the tuner is a STV0299B (atmel 306 24c02n SI27 and tda8060ts) The eeprom is empty (all bytes with FF) so i had to force to load the driver with: modprobe saa7134 card=128 It worked fine after a kernel update to 2.6.27.9 The snapshot version from linuxtv.org made the same problem. modprobe saa7134 card=97 doesn't work. The frontend can't be initialized?! saa7130/34: v4l2 driver version 0.2.14 loaded saa7130[0]: found at 0000:00:0b.0, rev: 1, irq: 18, latency: 32, mmio: 0xdfffdc00 saa7130[0]: subsystem: 0000:0000, board: LifeView FlyDVB-S /Acorp TV134DS [card=97,insmod option] saa7130[0]: board init: gpio is 0 input: saa7134 IR (LifeView FlyDVB-S / as /class/input/input7 tuner' 4-0068: chip found @ 0xd0 (saa7130[0]) saa7130[0]: i2c eeprom 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7130[0]: registered device video0 [v4l2] saa7130[0]: registered device vbi0 dvb_init() allocating 1 frontend saa7130[0]/dvb: frontend initialization failed Flashing the eeprom with these two blocks and a reboot doesn't work 006851000354201C004343A91C55D2B29220FF860FFF20FFFFFFFFFFFFFFFFFFFF0140010303FF010308FF0128FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D00C0FF1C01F0FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 00424E000354201C004343A91C55D2B29220FF860FFF20FFFFFFFFFFFFFFFFFFFF0140010303FF010308FF01FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF1D00C0FF1C01F0FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Any ideas? Thanks! Maze' _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
