Hi, Devin Heitmueller schrieb: >> I also occasionally get >> dib0700: firmware download failed at 17248 with -110 >> My PC's got ATI's IXP SB400 USB2 Host Controllers. >> Rob Watkins > Hello Robert, > Are you running dib0700 firmware version 1.10 or 1.20? > Devin As written before. I got an MB with SB700 USB Chipset and it seems to have the same problems as the SB600 with the USB ports (disconnects here and then). The SB400 seems to have them also? I use a http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_DT_USB_XS_Diversity which is nearly the same as the Nova. Now my system got a NEC-Chip USB PCIcard and everything works fine with the Cinergy connected there.
My Hauppauge Nova-T 500 Dual DVB-T is a PCI card with built in VIA USB controller.
watkins@watkins-desktop:~$ lspci -vv | grep -i usb
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
02:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
02:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
02:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
The WinTV Nova-DT is connected to the USB 2.0 VIA Hub.
The USB 1.1 VIA hubs don't appear to have devices connected to them.
Regards,
Rob
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
