On Tue, 2008-11-25 at 15:29 -0500, Devin Heitmueller wrote: > On Tue, Nov 25, 2008 at 3:19 PM, Robert Watkins <robert@xxxxxxxxxxx> wrote: > > On Mon, 2008-11-24 at 21:29 +0000, Richard Palmer wrote: > >> Hi, > >> > >> On Mon, Nov 24, 2008 at 8:02 PM, Nicolas Will <nico@xxxxxxxxxxxx> wrote: > >> > On Mon, 2008-11-24 at 19:34 +0000, jon bird wrote: > >> >> could be although on perusing the mailing list archives this seemed > >> >> to > >> >> be a recurring problem of which various attempts have been made to > >> >> investigate/fix but there didn't seem to be a conclusion to it all. > >> >> Hence I just thought I'd see what the latest state of play was and > >> >> report back anything potentially useful..... > >> > > >> > Well, this has normally been solved. Your report is the first one in a > >> > long time. > >> > >> I'll second the report. Also with a VIA motherboard, so the USB ports > >> could be the > >> culprit. Running Mythbuntu with kernel 2.6.24 and using the new > >> firmware still gives > >> i2c errors. > >> > > > > I've found Unbuntu 2.6.24-21-386 worked reasonable well with errors > > requiring a shut down and cold start once or twice a week. > > > > After an upgrade, I found 2.6.27-7-generic fails within seconds of > > starting to record on two tuners. > > dvb-usb: error while enabling fifo. > > > > The current v4l-dvb drivers have the same issue. > > > > I also occasionally get > > dib0700: firmware download failed at 17248 with -110 > > > > My PC's got ATI's IXP SB400 USB2 Host Controllers. > > > > Rob Watkins > > Hello Robert, > > Are you running dib0700 firmware version 1.10 or 1.20? Hello Devin, I switched to 1.10 after having problems with the 1.20 firmware. I swapped the files back yesterday, and tried running with the current drivers and the 1.20 firmware after a cold boot. You are right. The 1.20 firmware is significantly better than 1.10. A one point the 1.20 firmware ran for almost 2 hours before I noticed problems. I shut down and restarted a couple of times after that, and got errors within minutes. The number the firmware download fails at changed each time but the "with -110" was the same. Best Wishes, Rob <snip> [ 23.538141] dib0700: loaded with support for 8 different device-types [ 23.539042] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 23.539051] firmware: requesting dvb-usb-dib0700-1.20.fw [ 24.890408] lirc_dev: IR Remote Control driver registered, major 61 [ 25.090680] Linux video capture interface: v2.00 [ 25.214298] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 26.368174] dib0700: firmware download failed at 20146 with -110 [ 26.368380] usbcore: registered new interface driver dvb_usb_dib0700 <snip> [ 76.840589] usbcore: deregistering interface driver dvb_usb_dib0700 [ 76.949087] dib0700: loaded with support for 8 different device-types [ 76.951065] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 76.951079] firmware: requesting dvb-usb-dib0700-1.20.fw [ 76.955490] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 77.166854] dib0700: firmware started successfully. [ 77.668057] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 77.668149] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 77.668495] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 77.800034] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... [ 77.888529] MT2060: successfully identified (IF1 = 1229) [ 78.383196] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 78.383469] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 78.390786] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 78.417569] MT2060: successfully identified (IF1 = 1217) [ 78.974397] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 78.977954] usbcore: registered new interface driver dvb_usb_dib0700 [ 230.456120] dvb-usb: error while enabling fifo. [ 1958.525133] dvb-usb: error while stopping stream. [ 1976.092180] mt2060 I2C write failed [ 2281.908116] mt2060 I2C write failed [ 2676.912186] mt2060 I2C write failed [ 2806.924148] mt2060 I2C write failed (len=2) [ 2811.924179] mt2060 I2C write failed (len=6) [ 2816.924849] mt2060 I2C read failed [ 2821.932136] mt2060 I2C read failed [ 2826.940180] mt2060 I2C read failed [ 2831.949212] mt2060 I2C read failed [ 2836.957124] mt2060 I2C read failed [ 2841.968042] mt2060 I2C read failed [ 2846.976207] mt2060 I2C read failed [ 2851.985868] mt2060 I2C read failed [ 2856.993026] mt2060 I2C read failed [ 2862.000703] mt2060 I2C read failed _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
