> ----- Original Message -----> From: "Igor M. Liplianin" <liplianin@xxxxxx>> To: stev391@xxxxxxxxx> Cc: linux-dvb@xxxxxxxxxxx, stoth@xxxxxxxxxxx> Subject: Re: [PATCH] Add Compro VideoMate E650F (DVB-T part only)> Date: Tue, 25 Nov 2008 01:57:33 +0200> > > В сообщении от 24 November 2008 23:51:35 stev391@xxxxxxxxx написал(а):> > > Message: 2> > > Date: Sun, 23 Nov 2008 13:47:41 +0200> > > From: "Igor M. Liplianin" <liplianin@xxxxxx>> > > Subject: [linux-dvb] [PATCH] Add Compro VideoMate E650F (DVB-T part> > > only)> > > To: linux-dvb@xxxxxxxxxxx, video4linux-list@xxxxxxxxxx> > > Message-ID: <200811231347.41452.liplianin@xxxxxx>> > > Content-Type: text/plain; charset="koi8-r"> > >> > > From: Igor M. Liplianin <liplianin@xxxxx>> > >> > > Add Compro VideoMate E650F (DVB-T part only).> > > The card based on cx23885 PCI-Express chip, xc3028 tuner and ce6353> > > demodulator.> > >> > > Signed-off-by: Igor M. Liplianin <liplianin@xxxxx>> >> > ----Snip---> >> > Igor,> >> > Is this based on my earlier patches sent to the mailing list?> > http://linuxtv.org/pipermail/linux-dvb/2008-August/028341.html> Hi Stephen> Sorry, I missed that post .> So you are the first :)> I didn't see any functional difference between both patches> > >> > If so have you had this working correctly?> Actually, I bought this card couple days ago for experimens.> Then I type> modprobe cx23885 card=12> And it works immediately :)> But I didn't forget the firmware for xc3028 ;)> Others is technic.> So, It works right now in my computer.> With Kaffeine I'm able search for channels and watch them.> > >> > What happens if you do now request the module cx25840?> It loads:)> > >> > My patches were previously not committed due to:> > * I only had two people who had this card (same pci ids) and both gave me> > conflicitng results. (regarding the need for cx25840, if you search the> > mailing list archives from about August through September this year you> > will find the conversations). * The pci ids are shared across various cards> > from Compro VideoMate Series and therefore the cards are detected> > incorrectly, the eeprom dumps for each card that people have contacted the> > list about previously are on the wiki pages.> >> > Keep up the effort in supporting DVB cards in linux.> >> > Regards,> > Stephen.> > > Best Regards> Igor Igor, Sorry I had a typo in my previous email:What happens if you do NOT request the module cx25840? Does it still work? If it doesn't: request the module, but comment out these lines in cx25840-core.c: if (state->is_cx23885) { /* Drive GPIO2 direction and values */ cx25840_write(client, 0x160, 0x1d); cx25840_write(client, 0x164, 0x00); }What I need to know is if these writes are enabling the card to work correctly. NOTE: after each change mentioned in this email perform a hard reset of the computer (Or even better remove power to the computer completely for a short period) as the card's registers do not get reset all the time, this puts it in a known state. Regards,Stephen. -- Be Yourself @ mail.com!Choose From 200+ Email AddressesGet a Free Account at www.mail.com _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
