Приветствую, Helmut> Hello List,> > I just tried to get my tbs 8920 running with current S2API and VDR and > also with the multiproto drivers and a patch for this card.> Both versions are failing, with this error:> > Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18> Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation > wird nicht unterstützt> Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to > channel 3, tp 112187> Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation > wird nicht unterstützt> Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18> Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation > wird nicht unterstützt> Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18> > dmesg shows:> > LNB Voltage SEC_VOLTAGE_off> ACPI: PCI interrupt for device 0000:01:09.0 disabled> cx88/2: unregistering cx8802 driver, type: dvb access: shared> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]> ACPI: PCI interrupt for device 0000:01:09.2 disabled> Linux video capture interface: v2.00> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11> cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 > [card=72,autodetected], frontend(s): 1> cx88[0]: TV tuner type 4, Radio tuner type -1> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio: > 0xfc000000> cx88[0]/0: registered device video0 [v4l2]> cx88[0]/0: registered device vbi0> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded> cx88[0]/2: cx2388x 8802 Driver Manager> ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11> cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio: > 0xfd000000> cx8802_probe() allocating 1 frontend(s)> cx88/2: cx2388x dvb driver version 0.0.6 loaded> cx88/2: registering cx8802 driver, type: dvb access: shared> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]> cx88[0]/2: cx2388x based DVB/ATSC card> DVB: registering new adapter (cx88[0])> DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...> cx24116_firmware_ondemand: Waiting for firmware upload > (dvb-fe-cx24116.fw)...> cx24116_firmware_ondemand: Waiting for firmware upload(2)...> cx24116_load_firmware: FW version 1.22.82.0> cx24116_firmware_ondemand: Firmware upload complete> LNB Voltage SEC_VOLTAGE_13> LNB Voltage SEC_VOLTAGE_18> > I also tested this patch:> http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d> > but without any change.> > Any hints whats going wrong here ? http://mercurial.intuxication.org/hg/s2-liplianin/file/d423b7887ec8/linux/Documentation/video4linux/CARDLIST.cx88 69 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] 70 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] 71 70 -> TeVii S460 DVB-S/S2 [d460:9022] 72 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] 73 72 -> TBS 8920 DVB-S/S2 [8920:8888] 74 73 -> TeVii S420 DVB-S [d420:9022] 75 74 -> Prolink Pixelview Global Extreme [1554:4976] 76 75 -> PROF 7300 DVB-S/S2 [B033:3033] please try http://mercurial.intuxication.org/hg/s2-liplianin Goga _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb