Hello List, I just tried to get my tbs 8920 running with current S2API and VDR and also with the multiproto drivers and a patch for this card. Both versions are failing, with this error: Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18 Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation wird nicht unterstützt Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to channel 3, tp 112187 Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation wird nicht unterstützt Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18 Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation wird nicht unterstützt Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18 dmesg shows: LNB Voltage SEC_VOLTAGE_off ACPI: PCI interrupt for device 0000:01:09.0 disabled cx88/2: unregistering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71] ACPI: PCI interrupt for device 0000:01:09.2 disabled Linux video capture interface: v2.00 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1 cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio: 0xfc000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio: 0xfd000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72] cx88[0]/2: cx2388x based DVB/ATSC card DVB: registering new adapter (cx88[0]) DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)... cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... cx24116_firmware_ondemand: Waiting for firmware upload(2)... cx24116_load_firmware: FW version 1.22.82.0 cx24116_firmware_ondemand: Firmware upload complete LNB Voltage SEC_VOLTAGE_13 LNB Voltage SEC_VOLTAGE_18 I also tested this patch: http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d but without any change. Any hints whats going wrong here ? -- Helmut Auer, helmut@xxxxxxxxxxxxx _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
