In message <BLU126-W53DD1C6541585D37293AC1AF1F0@xxxxxxx>, Steve Thro wrote: lo >> Ok. I just tested here: >>=20 >>> szap-s2 -x -c ./channels.conf "BSkyB Discovery HD" >> reading channels from file './channels.conf' >> zapping to 975 'BSkyB Discovery HD': >> delivery DVB-S2=2C modulation QPSK >> sat 1=2C frequency 12324 MHz V=2C symbolrate 29500000=2C coderate 3/4=2C = >rolloff 0.35 >> vpid 0x0202=2C apid 0x1fff=2C sid 0x0edb >> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >> status 1f | signal d200 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS= >_LOCK >>=20 >> it seems to work. > >There are some difference between your output and mine: >yours: >rolloff 0.35 >sid 0x0edb > >mine=3B >rolloff auto >sid 0x0000 > > >Could you post your channels.conf? you can roll your own if you have a universal LNB ? hg clone http://hg.kewl.org/xmldvb/ refer to the README file for setup and use. this util is only 3 days old so is mostly untested. BTW, If you don't have universal LNB then please forward a patch :-) I can e-mail my conf seperately in any case but it's not VDR ? is that ok ? cya -- // / {:)==={ Darron Broad <darron@xxxxxxxx> \\ \ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
