Stefano Sabatini wrote:
On date Tuesday 2008-10-14 23:24:02 +0200, Stefano Sabatini wrote:
Hi all,
can you say what's the meaning of such a message?
I'm using it with:
dvbscan /usr/share/dvb/dvb-t/it-MyCity
Unable to query frontend status
using a TerraTec Electronic GmbH with dvb-usb-dib0700 driver.
The module seems to be loaded correctly, indeed I get this in the
kernel log:
[ 1834.456051] dib0700: loaded with support for 7 different device-types
[ 1834.456051] dvb-usb: found a 'Terratec Cinergy HT USB XE' in cold state, will try to load a firmware
[ 1834.456051] firmware: requesting dvb-usb-dib0700-1.10.fw
[ 1834.464197] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 1834.662979] dib0700: firmware started successfully.
[ 1835.168928] dvb-usb: found a 'Terratec Cinergy HT USB XE' in warm state.
[ 1835.168997] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1835.169355] DVB: registering new adapter (Terratec Cinergy HT USB XE)
[ 1835.419963] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 1835.499932] xc2028 1-0061: creating new instance
[ 1835.499932] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 1835.499932] input: IR-receiver inside an USB DVB receiver as /class/input/input7
[ 1835.510406] dvb-usb: schedule remote query interval to 150 msecs.
[ 1835.510416] dvb-usb: Terratec Cinergy HT USB XE successfully initialized and connected.
[ 1835.510696] usbcore: registered new interface driver dvb_usb_dib0700
The led on the device switched on when I performed the first scan.
Other meaningful info:
stefano@geppetto ~> dvbscan /usr/share/dvb/dvb-t/it-Cagliari
Unable to query frontend status
stefano@geppetto ~> sudo dvbscan /usr/share/dvb/dvb-t/it-Cagliari
Unable to query frontend status
stefano@geppetto ~> ls -l /dev/dvb/adapter0/
total 0
crw-rw---- 1 root video 212, 1 2008-09-23 00:04 audio0
crw-rw---- 1 root video 212, 6 2008-09-23 00:04 ca0
crw-rw---- 1 root video 212, 4 2008-09-23 00:04 demux0
crw-rw---- 1 root video 212, 5 2008-09-23 00:04 dvr0
crw-rw---- 1 root video 212, 3 2008-09-23 00:04 frontend0
crw-rw---- 1 root video 212, 7 2008-09-23 00:04 net0
crw-rw---- 1 root video 212, 8 2008-09-23 00:04 osd0
crw-rw---- 1 root video 212, 0 2008-09-23 00:04 video0
stefano@geppetto ~> uname -a
Linux geppetto 2.6.26-1-686 #1 SMP Thu Oct 9 15:18:09 UTC 2008 i686 GNU/Linux
The device is reported to be supported on the DVB wiki:
http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_HT_USB_XE
Help or hints will be appreciated.
Regards.
I believe I have seen a message like this when something else
is talking to the card already. For instance, I run
my cards in a Mythtv system, and in mythtv there is a setting
to only attach to the card when actually using the card. If that
setting is set incorrectly, mythtv will attach to the card
at startup, and keep exclusive use of the card, not allowing
anyone else to access the card at all.
begin:vcard
fn:Mark Paulus
n:Paulus;Mark
org:MCI;Lec Interfaces / 40419
adr;dom:;;2424 Garden of the Gods Rd;Colorado Springs;CO;80919
email;internet:mark.paulus@xxxxxxxxxxxxxxxxxxx
title:Mark Paulus
tel;work:719-535-5578
tel;pager:800-pagemci / 1406052
tel;home:v622-5578
version:2.1
end:vcard
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
