Hi all, can you say what's the meaning of such a message? I'm using it with: dvbscan /usr/share/dvb/dvb-t/it-MyCity Unable to query frontend status using a TerraTec Electronic GmbH with dvb-usb-dib0700 driver. The module seems to be loaded correctly, indeed I get this in the kernel log: [ 1834.456051] dib0700: loaded with support for 7 different device-types [ 1834.456051] dvb-usb: found a 'Terratec Cinergy HT USB XE' in cold state, will try to load a firmware [ 1834.456051] firmware: requesting dvb-usb-dib0700-1.10.fw [ 1834.464197] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' [ 1834.662979] dib0700: firmware started successfully. [ 1835.168928] dvb-usb: found a 'Terratec Cinergy HT USB XE' in warm state. [ 1835.168997] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1835.169355] DVB: registering new adapter (Terratec Cinergy HT USB XE) [ 1835.419963] DVB: registering frontend 0 (DiBcom 7000PC)... [ 1835.499932] xc2028 1-0061: creating new instance [ 1835.499932] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 1835.499932] input: IR-receiver inside an USB DVB receiver as /class/input/input7 [ 1835.510406] dvb-usb: schedule remote query interval to 150 msecs. [ 1835.510416] dvb-usb: Terratec Cinergy HT USB XE successfully initialized and connected. [ 1835.510696] usbcore: registered new interface driver dvb_usb_dib0700 The led on the device switched on when I performed the first scan. Thanks for any help. Regards. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
