On Tue, 2008-10-14 at 18:43 -0500, Tom Moore wrote: > I just bought two Hauppauge HVR-1600 cards and I'm trying to set them > up in > > Mythdorra 5. I have the cx18 drivers installed but it is only > initializing one > > card. I'm getting the following message when I do a dmesg | grep cx18. > Has > > anyone ran accross this problem before with duel cards of the same > model and if > > so, how do I fix it? Any help will be greatly appreciated. > > > > Thanks, > > Tom Moore > > Houston, TX > > > > dmesg | grep cx18 > > cx18: Start initialization, version 1.0.1 > cx18-1: Initializing card #1 > > cx18-1: Autodetected Hauppauge card > > cx18-1: Unreasonably low latency timer, setting to 64 (was 32) > > cx18-1: ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h > > cx18-1: or disabling CONFIG_HIGHMEM4G into the kernel would help > > cx18-1: Error -12 on initialization > > cx18: probe of 0000:02:04.0 failed with error -12 > > cx18: End initialization > You're out of vmalloc address space. Each cx18 needs 64 MB of vmalloc space for MMIO mappings. Do this: $ cat /proc/meminfo | grep Vmalloc Edit your bootloader's config file to add a 'vmalloc=xxxM' option to your kernel commandline. Use a value that is 128M greater than your current VmallocTotal. Regards, Andy _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
