On Sat, Oct 11, 2008 at 12:58 AM, Chris Russell <v4l@xxxxxxxxxxxxxxxxx> wrote: > On Fri, 10 Oct 2008 04:19:31 +0200 > "Markus Rechberger" <mrechberger@xxxxxxxxx> wrote: > >> On Fri, Oct 10, 2008 at 4:13 AM, Chris Russell <v4l@xxxxxxxxxxxxxxxxx> wrote: >> > I have a KWorld DVB-T 305U on Gentoo using the v4l-dvb-hg >> > package (live development version of v4l&dvb-driver for Kernel 2.6) >> > that I updated today (03Oct08). >> > >> > The analog TV looks great but I cannot get the sound to work. >> > I have tried just about everything I could find searching including: >> > $ arecord -D hw:1 -f dat | aplay -f dat >> > and >> > $ mplayer tv:// -tv driver=v4l2:device=/dev/video0:chanlist=us-cable:alsa:adevice=hw.1,0:amode=1:audiorate=32000:forceaudio:volume=100:immediatemode=0:norm=NTSC >> > and >> > $ v4lctl volume mute off; v4lctl volume 31 >> > and >> > even attempting a manual cat from /dev/audio1 to /dev/audio >> > >> > So what am I missing or is audio for the 305U not working yet? >> > >> >> Hi, >> >> you need the em28xx-new code from mcentral.de in order to get audio >> work with it, audio for it is still in progress but it should work >> fine as long as you have attached one device only. >> >> Markus > > Thanks for the reply. Unfortunately, I still end up with the same > result. I un-installed v4l-dvb-hg, added back v4l support in my kernel > (2.6.26) and pulled down the latest em28xx-new driver (based on the > sunshine overlay which pulls from > http://mcentral.de/hg/~mrec/em28xx-new/). Again, tv works but audio > does not. Did I miss something? > I think you have to look at em28xx-audioep.ko for this device. Markus > Soli Deo Gloria, > Chris > > -- dmesg output -- > usb 2-5: new high speed USB device using ehci_hcd and address 5 > usb 2-5: configuration #1 chosen from 1 choice > em28xx v4l2 driver version 0.0.1 loaded > em28xx: new video device (eb1a:e305): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: tvp5150 detected. > tvp5150 1-005c: tvp5150am1 detected. > successfully attached tuner > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em28xx #0: Found KWorld DVB-T 305U > usbcore: registered new interface driver em28xx > em2880-dvb.c: DVB Init > em2880-dvb.c: unsupported device > Em28xx: Initialized (Em2880 DVB Extension) extension > tvp5150 1-005c: tvp5150am1 detected. > Em28xx: Removed (Em2880 DVB Extension) extension > usbcore: deregistering interface driver em28xx > em28xx #0: disconnecting em28xx#0 video > em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered > em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
