I have a KWorld DVB-T 305U on Gentoo using the v4l-dvb-hg package (live development version of v4l&dvb-driver for Kernel 2.6) that I updated today (03Oct08). The analog TV looks great but I cannot get the sound to work. I have tried just about everything I could find searching including: $ arecord -D hw:1 -f dat | aplay -f dat and $ mplayer tv:// -tv driver=v4l2:device=/dev/video0:chanlist=us-cable:alsa:adevice=hw.1,0:amode=1:audiorate=32000:forceaudio:volume=100:immediatemode=0:norm=NTSC and $ v4lctl volume mute off; v4lctl volume 31 and even attempting a manual cat from /dev/audio1 to /dev/audio So what am I missing or is audio for the 305U not working yet? Soli Deo Gloria, Chris -- lsusb output -- Bus 002 Device 002: ID eb1a:e305 eMPIA Technology, Inc. -- lsmod output -- Module Size Used by tuner_xc2028 17712 1 tuner 21444 0 tvp5150 15376 0 em28xx 44584 2 videodev 28160 2 tuner,em28xx v4l1_compat 11396 1 videodev compat_ioctl32 768 1 em28xx videobuf_vmalloc 3844 1 em28xx videobuf_core 9988 2 em28xx,videobuf_vmalloc ir_common 29444 1 em28xx snd_usb_audio 47200 0 snd_usb_lib 9472 1 snd_usb_audio v4l2_common 7040 3 tuner,tvp5150,em28xx snd_rawmidi 11168 1 snd_usb_lib tveeprom 10884 1 em28xx snd_hwdep 3588 1 snd_usb_audio -- dmesg output -- usb 2-5: new high speed USB device using ehci_hcd and address 4 usb 2-5: configuration #1 chosen from 1 choice usbcore: registered new interface driver snd-usb-audio Linux video capture interface: v2.00 em28xx v4l2 driver version 0.1.0 loaded em28xx new video device (eb1a:e305): interface 0, class 255 em28xx Has usb audio class em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 em28xx #0: chip ID is em2860 em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 05 e3 50 00 5c 00 6a 22 00 00 em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 06 00 01 00 f0 10 01 00 00 00 00 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00 em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a, hash = 0xa8a51142 Vendor/Product ID= eb1a:e305 AC97 audio (5 sample rates) 500mA max power Table at 0x04, strings=0x226a, 0x0000, 0x0000 em28xx #0: em28xx #0: The support for this board weren't valid yet. em28xx #0: Please send a report of having this working em28xx #0: not to V4L mailing list (and/or to other addresses) tuner' 1-0061: chip found @ 0xc2 (em28xx #0) xc2028 1-0061: creating new instance xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner firmware: requesting xc3028-v27.fw xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
