Pieter Van Schaik wrote: > Hi Steve, > > first of all, I cannot begin to thank you enough for replying I am most > grateful! Secondly, I apologize if my question seemed idiotic, I have > still much to learn regarding the open source community. > > I am extremely glad to hear that you are one of the maintainers and I > hope you can provide me with some guidance regarding the following matter: > > I have a winfast tv2000 xp global card installed on a mythbuntu system. > I have everything working except for the remote control. I understand > that the remote control should be listed in the output of "cat > /proc/bus/input/devices" but I do not see it there. I have looked > through the source code of the cx88-input.c file and I noticed that > within the cx88-ir-init() function there is no case statement for this > particular card, could this be related to my problem? Any guidance would > be greatly appreciated. Please CC the mailing list when it's related to basic kernel issues. (I've re-added them). cx88-input.c contains all of the code to handle IR for the cx88 cards. If you don't see a case statement for your card then nobody has implemented IR. Look for similar winfast cards and see how they implement their IR, CX88_BOARD_WINFAST_DTV2000H: or case CX88_BOARD_WINFAST2000XP_EXPERT: case CX88_BOARD_WINFAST_DTV1000: Add your baord definition in one of these points and see of you can encourage some IR activity. Regards, Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
