Clemens Sutor schrieb:> Fredrik Jonson schrieb:> >> Hello>>>> I have the same problem but with VP-1034 se my post >> VP-1034 and CI >> <http://www.linuxtv.org/pipermail/linux-dvb/2008-September/028860.html>>>>> /fjonson>> <http://www.linuxtv.org/pipermail/linux-dvb/2008-September/028860.html>>>>> >>> From: stefan_ell@xxxxxxxxxxx>>> To: linux-dvb@xxxxxxxxxxx>>> Date: Fri, 19 Sep 2008 12:41:32 +0200>>> Subject: [linux-dvb] VP 1041 CAM: dvb_ca adapter 0: Invalid PC card >>> >> inserted>> >>> Hi list>>>>>> If I attach the Common Interface to the card (Twinhan VP 1041) and >>> >> reload the mantis modules dmesg output is the following:>> >>> [ 6979.969526] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC2] -> >>> >> GSI 17 (level, low) -> IRQ 21>> >>> [ 6979.969562] irq: 21, latency: 32>>> [ 6979.969566] memory: 0xd5100000, mmio: 0xf8c1c000>>> [ 6979.969573] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0),>>> [ 6979.969576] Mantis Rev 1 [1822:0031], irq: 21, latency: 32>>> [ 6979.969579] memory: 0xd5100000, mmio: 0xf8c1c000>>> [ 6979.972276] MAC Address=[00:08:ca:1c:3f:4c]>>> [ 6979.972312] mantis_alloc_buffers (0): DMA=0x2ef10000 >>> >> cpu=0xeef10000 size=65536>> >>> [ 6979.972319] mantis_alloc_buffers (0): RISC=0x13ddc000 >>> >> cpu=0xd3ddc000 size=1000>> >>> [ 6979.972323] DVB: registering new adapter (Mantis dvb adapter)>>> [ 6980.520344] stb0899_attach: Attaching STB0899>>> [ 6980.520353] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 >>> >> frontend @0x68>> >>> [ 6980.520362] stb6100_attach: Attaching STB6100>>> [ 6980.520715] DVB: registering frontend 0 (STB0899 Multistandard)...>>> [ 6980.520778] mantis_ca_init (0): Registering EN50221 device>>> [ 6980.522811] mantis_ca_init (0): Registered EN50221 device>>> [ 6980.522825] mantis_hif_init (0): Adapter(0) Initializing Mantis >>> >> Host Interface>> >>> [ 6981.528828] dvb_ca adapter 0: Invalid PC card inserted :(>>>>>> Since it is the official Viaccess "red cam" (Rev 1.0) I don't >>> >> understand the problem - this one worked just fine in any STB I ever >> used - I know I might have to update the CAMs firmware if I want to >> watch HD content, but nevertheless: shouldn't this work for any non HD >> content as it does on my STB?>> >>> Anyone has issues with the same CAM Revision and mantis cards?>>> _________________________________________________________________>>> >> Hello,>> as far as I know, the whole mantis driver tree has no working CI/CAM > support yet. For sure I know this for the mantis 2033 and 2040 based > cards and in in the source code the CI/CAM support is implemented the > same way for all mantis based cards.>> The descriped problem is known, but now solved. A lot of the CI support > is working allready, but the driver is still not finished and stable. > The mantainer of the mantis tree told in the mailing list here, that the > problem is not easy to find and he contacted the vendor to get some more > technical details. So we have to be patient until there is a working > solution.>> Bye> Clemens> Sorry, typo, not "now solved" "NOT solved" :) _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
