Hi list If I attach the Common Interface to the card (Twinhan VP 1041) and reload the mantis modules dmesg output is the following: [ 6979.969526] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 [ 6979.969562] irq: 21, latency: 32 [ 6979.969566] memory: 0xd5100000, mmio: 0xf8c1c000 [ 6979.969573] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0), [ 6979.969576] Mantis Rev 1 [1822:0031], irq: 21, latency: 32 [ 6979.969579] memory: 0xd5100000, mmio: 0xf8c1c000 [ 6979.972276] MAC Address=[00:08:ca:1c:3f:4c] [ 6979.972312] mantis_alloc_buffers (0): DMA=0x2ef10000 cpu=0xeef10000 size=65536 [ 6979.972319] mantis_alloc_buffers (0): RISC=0x13ddc000 cpu=0xd3ddc000 size=1000 [ 6979.972323] DVB: registering new adapter (Mantis dvb adapter) [ 6980.520344] stb0899_attach: Attaching STB0899 [ 6980.520353] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 frontend @0x68 [ 6980.520362] stb6100_attach: Attaching STB6100 [ 6980.520715] DVB: registering frontend 0 (STB0899 Multistandard)... [ 6980.520778] mantis_ca_init (0): Registering EN50221 device [ 6980.522811] mantis_ca_init (0): Registered EN50221 device [ 6980.522825] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface [ 6981.528828] dvb_ca adapter 0: Invalid PC card inserted :( Since it is the official Viaccess "red cam" (Rev 1.0) I don't understand the problem - this one worked just fine in any STB I ever used - I know I might have to update the CAMs firmware if I want to watch HD content, but nevertheless: shouldn't this work for any non HD content as it does on my STB? Anyone has issues with the same CAM Revision and mantis cards? _________________________________________________________________ Die neue Generation der Windows Live Services - jetzt downloaden! http://get.live.com _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
