Re: Measuring signal strench on TT S2-3200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, 
Now, I am using latest drivers from Igor M.Liplianin and these problems should be fixed. Now video runs without any blackouts or errors... Great work!
Igor, I want to ask you about progress of scan and szap utilities for dvb-s2.
Best regardsTomas______________________________________________________________> Od: hoppik@xxxxxxxxxx> Komu: <linux-dvb@xxxxxxxxxxx>> Datum: 03.09.2008 10:55> Předmět:  Measuring signal strench on TT S2-3200>>Hello,>>For quick test I used getstream utility. Later I am planning to use vdr with some plugins for streaming. >>I have parabola directed to 23.5E (Astra 3A/1E). I tested two FTA programs Ocko and CT24. On second computer there was VLC running. I think parabola is directed correctly, because I have borrowed desktop receiver and there was no problem with these programs.>>I tried latest drivers from Igor M. Liplianin but I have the same problems with multiproto drivers.>>When I was streaming Ocko, on second computer there was good screen, but sometimes (aprox once per 30 seconds) was shortly breaking.>>When I was streaming CT24, it was running only for max 10 seconds and then getstream utility stopped sending stream packets.>>There is debug output from getstream utility:>2008-08-31 20:11:59.655 fe: Adapter 0 Setting up frontend tuner>2008-08-31 20:11:59.668 fe: DVB-S tone = 0>2008-08-31 20:11:59.668 fe: DVB-S voltage = 0>2008-08-31 20:11:59.668 fe: DVB-S diseqc = 0>2008-08-31 20:11:59.668 fe: DVB-S freq = 12525000>2008-08-31 20:11:59.668 fe: DVB-S lof1 = 9750000>2008-08-31 20:11:59.668 fe: DVB-S lof2 = 10600000>2008-08-31 20:11:59.668 fe: DVB-S slof = 11700000>2008-08-31 20:11:59.668 fe: DVB-S feparams.frequency = 1925000>2008-08-31 20:11:59.668 fe: DVB-S feparams.inversion = 2>2008-08-31 20:11:59.668 fe: DVB-S feparams.u.qpsk.symbol_rate = 27500000>2008-08-31 20:11:59.668 dmx: Setting filter for pid 8192 pestype 20>2008-08-31 20:11:59.816 fe: Adapter 0 Status: 0x1e (HAS_CARRIER HAS_VITERBI HAS_SYNC HAS_LOCK)>>And there is configuration file:># cat /usr/src/getstream/getstream.conf.cslink>http {>    port 8001;>};>>adapter 0 {>  budget-mode 1;>>    dvb-s {>        lnb {>            lof1 9750000;>            lof2 10600000;>            slof 11700000;>        };>>        transponder {>            frequency 12525000;>            polarisation v;>            symbol-rate 27500000;>            diseqc 0;>        };>    };>>    stream {>        name "CT24";>        input {>            pnr 8006;>        };>        output-rtp {>            remote-address 10.0.148.98;>            remote-port 3000;>        };>        sap {>                scope global;>                playgroup "testovaci sat";>                ttl 5;>        };>    };>};>>>_______________________________________________>linux-dvb mailing list>linux-dvb@xxxxxxxxxxx>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb>

_______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux