On Sat, Sep 13, 2008 at 3:25 AM, Andy Walls <awalls@xxxxxxxxx> wrote:
> On Fri, 2008-09-12 at 15:16 -0400, Patrick Boisvenue wrote:
>> Patrick Boisvenue wrote:
>> > Michael Krufky wrote:
>> >> On Fri, Sep 12, 2008 at 2:24 PM, Patrick Boisvenue <patrbois@xxxxxxxx> wrote:
>> >>> Andy Walls wrote:
>> >>>> On Wed, 2008-09-10 at 20:37 -0400, Patrick Boisvenue wrote:
>> >>>>> Andy Walls wrote:
>> >>>>>> On Tue, 2008-09-09 at 22:37 -0400, Steven Toth wrote:
>> >>>>>>> Patrick Boisvenue wrote:
>> >>>>>>>> Steven Toth wrote:
>> >>>>>>>>> Patrick Boisvenue wrote:
>> >>>>>>>> When launching dvbscan I get the following in dmesg:
>> >>>>>>>>
>> >>>>>>>> xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
>> >>>>>>>> firmware: requesting dvb-fe-xc5000-1.1.fw
>> >>>>>>>> kobject_add_internal failed for i2c-2 with -EEXIST, don't try to
>> >>>>>>>> register things with the same name in the same directory.
>> >>>>>>>> Pid: 8059, comm: kdvb-fe-0 Tainted: P 2.6.26-gentoo #11
>> >>>>>>>>
>> >>>>>>>> Call Trace:
>> >>>>>>>> [<ffffffff8036abb5>] kobject_add_internal+0x13f/0x17e
>> >>>>>>>> [<ffffffff8036aff2>] kobject_add+0x74/0x7c
>> >>>>>>>> [<ffffffff80230b02>] printk+0x4e/0x56
>> >>>>>>>> [<ffffffff803eb84a>] device_add+0x9b/0x483
>> >>>>>>>> [<ffffffff8036a876>] kobject_init+0x41/0x69
>> >>>>>>>> [<ffffffff803f059d>] _request_firmware+0x169/0x324
>> >>>>>>>> [<ffffffffa00e9a7e>] :xc5000:xc_load_fw_and_init_tuner+0x64/0x293
>> >>>>>>>> [<ffffffff804a7222>] i2c_transfer+0x75/0x7f
>> >>>>>>>> [<ffffffffa00e53ad>] :s5h1409:s5h1409_writereg+0x51/0x83
>> >>>>>>>> [<ffffffffa00e9cea>] :xc5000:xc5000_init+0x3d/0x6f
>> >>>>>>>> [<ffffffffa0091b0c>] :dvb_core:dvb_frontend_init+0x49/0x63
>> >>>>>>>> [<ffffffffa0092e2c>] :dvb_core:dvb_frontend_thread+0x78/0x2f0
>> >>>>>>>> [<ffffffffa0092db4>] :dvb_core:dvb_frontend_thread+0x0/0x2f0
>> >>>>>>>> [<ffffffff80240eaf>] kthread+0x47/0x74
>> >>>>>>>> [<ffffffff8022bc41>] schedule_tail+0x27/0x5b
>> >>>>>>>> [<ffffffff8020be18>] child_rip+0xa/0x12
>> >>>>>>>> [<ffffffff80240e68>] kthread+0x0/0x74
>> >>>>>>>> [<ffffffff8020be0e>] child_rip+0x0/0x12
>> >>>>>>>>
>> >>>>>>>> fw_register_device: device_register failed
>> >>>>>>>> xc5000: Upload failed. (file not found?)
>> >>>>>>>> xc5000: Unable to initialise tuner
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> I have the firmware file located here:
>> >>>>>>>>
>> >>>>>>>> # ls -l /lib/firmware/dvb-fe-xc5000-1.1.fw
>> >>>>>>>> -rw-r--r-- 1 root root 12332 Aug 31 12:56
>> >>>>>>>> /lib/firmware/dvb-fe-xc5000-1.1.fw
>> >>>>>>>>
>> >>>>>>>> If there is anything else I can provide (or try) to help debug, let me
>> >>>>>>>> know,
>> >>>>>>>> ...Patrick
>> >>>>>>> > kobject_add_internal failed for i2c-2 with -EEXIST, don't try to
>> >>>>>>> > register things with the same name in the same directory.
>> >>>>>>>
>> >>>>>>> Ooh, that's nasty problem, this is new - and looks like it's i2c related.
>> >>>>>>>
>> >>>>>>> Why does this sound familiar? Anyone?
>> >>>>>> A cx18 user had a similar problem on one distro. I remeber running it
>> >>>>>> down to a race condition in creating device nodes in one of the
>> >>>>>> "virtual" filesystems (/proc or /sys) the device was looking for a
>> >>>>>> paretn PCI device entry to hook onto, but it wasn't created at the time
>> >>>>>> so it tries to create it itself. In the meantime some other part of the
>> >>>>>> kernel subsystem did actually finish creating the entry - so it exists
>> >>>>>> by the time the firmware load tries to make it.
>> >>>>>>
>> >>>>>> As far as I could tell, it should be non-fatal (not an Oops or panic),
>> >>>>>> but if the driver gives up on -EEXIST then things won't work obviously.
>> >>>>>>
>> >>>>>> I never resolved the problem for the user. I think some kernel change
>> >>>>>> outside of cx18 resolved it. That's all the details I have.
>> >>>>>>
>> >>>>>> Regards,
>> >>>>>> Andy
>> >>>>>>
>> >>>>> So what are my options?
>> >>>> Good question. I don't know. Working with kobjects is way out of my
>> >>>> knowledge base.
>> >>>>
>> >>>> I looked at the kernel code long enough to decide that without being
>> >>>> able to reproduce the problem myself, I won't be able to spot the root
>> >>>> cause. Part of the reason is that this problem is about looking for and
>> >>>> creating sysfs objects as it relates to driver probing and firmware
>> >>>> loading. I couldn't quite sort out what had to happen in series and
>> >>>> what the kernel could be executing in parallel.
>> >>>>
>> >>>> I think your best option would be to post to the LKML or wherever else
>> >>>> the sysfs and kobject experts hang out.
>> >>>>
>> >>>> Another option could be to modify the driver code that gives up when the
>> >>>> firmware operation returns an error code because a sysfs device node
>> >>>> already exists (-EEXIST). That's no big deal, and a driver should be
>> >>>> able to merrily go forward, if it can easily detect the condition.
>> >>>>
>> >>>>
>> >>> More observations before I go bother people LKML. This is the error
>> >>> with an older 2.6.25 kernel. The dmesg output is more interesting.
>
>
> OK. Let's look at where these sysfs entries exist and then how they get
> created.
>
>
> First look for the relevant sysfs entries on your running system.
> Here's an example from my system with a PVR-150 (i2c-0), an HVR-1600
> (i2c-2 & i2c-3) and my mainboard (i2c-1):
>
> # find /sys -name "i2c-[0-9]" -print
> /sys/devices/pci0000:00/0000:00:14.0/i2c-adapter/i2c-1
> /sys/devices/pci0000:00/0000:00:14.4/0000:03:02.0/i2c-adapter/i2c-0
> /sys/devices/pci0000:00/0000:00:14.4/0000:03:03.0/i2c-adapter/i2c-2
> /sys/devices/pci0000:00/0000:00:14.4/0000:03:03.0/i2c-adapter/i2c-3
> /sys/class/i2c-adapter/i2c-0
> /sys/class/i2c-adapter/i2c-1
> /sys/class/i2c-adapter/i2c-2
> /sys/class/i2c-adapter/i2c-3
>
> You can also do this to see what's in the i2c-* directories:
>
> # find /sys -name "i2c-[0-9]" -print -exec ls -l {} \;
>
> So now you can know the i2c buses that loaded modules have registered on
> your system. You can look up the PCI or USB bus numbers to see which
> device has which i2c-bus.
>
>
>
> Look at what firmwares are registered in the sysfs. Here's an example
> from my system with an PVR150 with a CX25843 decoder hanging off of the
> I2C bus of a CX23416:
>
> # find /sys -name "firmware" -exec ls -ld {} \;
> drwxr-xr-x 2 root root 0 2008-09-12 18:30 /sys/class/firmware
> drwxr-xr-x 3 root root 0 2008-09-12 17:36 /sys/firmware
> -r--r--r-- 1 root root 4096 2008-09-12 20:36 /sys/module/cx25840/parameters/firmware
>
> # cat /sys/module/cx25840/parameters/firmware
> v4l-cx25840.fw
>
>
> (I don't have a card with an XC5000 or XC3028.)
>
>
>
> Looking at the cx23885 driver core code, this is the sequence wind-up
> from the driver being modprobed to one of these i2c-* sysfs directory
> nodes initially getting created for the cx23885 device:
>
> drivers/media/video/cx23885/cx23885-core.c:cx23885_init()
> include/linux/pci.h:pci_register_driver()
> drivers/pci/pci-driver.c:__pci_register_driver()
> drivers/base/driver.c:driver_register()
> drivers/base/bus.c:bus_add_driver()
> drivers/base/dd.c:driver_attach()
> drivers/base/bus.c:bus_for_each_dev()
> drivers/base/dd.c:__driver_attach()
> drivers/base/dd.c:driver_probe_device()
> drivers/base/dd.c:really_probe()
> drivers/pci/pci-driver.c:pci_device_probe()
> drivers/pci/pci-driver.c:__pci_device_probe()
> drivers/pci/pci-driver.c:pci_call_probe()
> drivers/media/video/cx23885/cx23885-core.c:cx23885_initdev()
> drivers/media/video/cx23885/cx23885-core.c:cx23885_dev_setup()
> drivers/media/video/cx23885/cx23885-i2c.c:cx23885_i2c_register()
> drivers/i2c/i2c-core.c:i2c_add_adapter()
> drivers/i2c/i2c-core.c:i2c_register_adapter()
> drivers/base/core.c:device_register()
> drivers/base/core.c:device_add()
> lib/kobject.c:kobject_add()
> lib/kobject.c:kobject_add_varg()
> lib/kobject.c:kobject_add_internal()
> lib/kobject.c:create_dir()
> fs/sysfs/dir.c:sysfs_create_dir()
>
>
>
> And here's the wind up to the system trying to create the node again
> upon dvb frontend open that loads firmware to the xc5000 tuner hanging
> off of that i2c bus:
>
> drivers/media/dvb/dvb-core/dvb_frontend.c:dvb_frontend_open()
> drivers/media/dvb/dvb-core/dvb_frontend.c:dvb_frontend_start()
> include/linux/kthread.h:kthread_run()
> kernel/kthread.c:kthread_create()
> drivers/media/dvb/dvb-core/dvb_frontend.c:dvb_frontend_thread()
> drivers/media/dvb/dvb-core/dvb_frontend.c:dvb_frontend_init()
> drivers/media/common/tuners/xc5000.c:xc5000_init()
> drivers/media/common/tuners/xc5000.c:xc_load_fw_and_init_tuner()
> drivers/media/common/tuners/xc5000.c:xc5000_fw_upload()
> drivers/base/firmware_class.c:request_firmware()
> drivers/base/firmware_class.c:_request_firmware()
> drivers/base/firmware_class.c:fw_setup_device()
> drivers/base/firmware_class.c:fw_register_device()
> drivers/base/core.c:device_register()
> drivers/base/core.c:device_add()
> lib/kobject.c:kobject_add()
> lib/kobject.c:kobject_add_varg()
> lib/kobject.c:kobject_add_internal()
> lib/kobject.c:create_dir()
> fs/sysfs/dir.c:sysfs_create_dir()
>
>
> And that last call is where the EEXIST gripe comes from. I can't tell
> why exactly it's trying to recreate the i2c-* directory node in sysfs
> again. (Maybe it's iterating over the parent node for some reason?)
>
>
> If you've waited a long time to open the dvb frontend, the driver load
> should have already created the i2c-* directory node, and it should
> exist. There doesn't seem to be any duplicate checking until the sysfs
> directory node is attempted to be created again. I don't know if the
> call to request_firmware() in xc5000_fw_upload() is passing in the right
> "dev" structure (&priv->i2c_props.adap->dev) or not. The parent of the
> i2c bus adapter dev is the pci bus dev. Request firmware does end up
> copying the bus_id from the parent i2c adapter dev to make sure it gets
> installed in the right place under sysfs. I just can't see what's going
> wrong, aside from everything is happening as it should: and that
> logically leads to the error.
>
>
> The source code I'm looking at comes from this system:
>
> $ uname -a
> Linux morgan.walls.org 2.6.25.10-86.fc9.x86_64 #1 SMP Mon Jul 7 20:23:46 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
>
>
> Steve or Mike,
>
> Any ideas?
>
>
> Regards,
> Andy
>
>
>> >>>
>> >>> xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
>> >>>
>> >>>
>> >>> sysfs: duplicate filename 'i2c-1' can not be created
>> >>>
>> >>>
>> >> Patrick,
>> >>
>> >> This particular issue may have been fixed by my recent xc5000 patches
>> >> that were merged into the master branch a few days ago...
>> >>
>> >> Try pulling the v4l-dvb master branch -- that might help.
>> >>
>> >> HTH,
>> >>
>> >> Mike
>> >
>> > No change. Same error. Just to confirm I'm up to date, this is an
>> > output of "hg heads" for what I pulled in.
>> >
>> > changeset: 8964:e5ca4534b543
>> > tag: tip
>> > user: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
>> > date: Tue Sep 09 08:29:56 2008 -0700
>> > summary: s2255drv field count fix
>> >
>> > changeset: 8924:c793bb42e052
>> > user: Steven Toth <stoth@xxxxxxxxxxx>
>> > date: Tue Sep 09 10:52:06 2008 -0400
>> > summary: cx23885: Fix for HVR1500Q eeprom offset decoding
>> >
>> > ...Patrick
>> >
>>
>> see new dmesg output at end of message.
>>
>> >
>> >>> ------------[ cut here ]------------
>> >>>
>> >>>
>> >>> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one+0x3f/0x93()
>> >>>
>> >>>
>> >>> Modules linked in: wlan_wep xc5000 s5h1409 cx23885 compat_ioctl32
>> >>> videodev v4l1_compat cx2341x wlan_scan_sta videobuf_dma_sg
>> >>> ath_rate_sample v4l2_common btcx_risc tveeprom ath_pci videobuf_dvb
>> >>> dvb_core wlan ath_hal(P) videobuf_core
>> >>>
>> >>> Pid: 7730, comm: kdvb-fe-0 Tainted: P 2.6.25-gentoo-r6 #2
>> >>>
>> >>>
>> >>>
>> >>> Call Trace:
>> >>> [<ffffffff8023019d>] warn_on_slowpath+0x51/0x63
>> >>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> >>> [<ffffffff8029143a>] find_inode+0x28/0x6d
>> >>> [<ffffffff802bea5c>] sysfs_ilookup_test+0x0/0xf
>> >>> [<ffffffff8029156e>] ifind+0x44/0x8d
>> >>> [<ffffffff802bec58>] sysfs_find_dirent+0x1b/0x2f
>> >>> [<ffffffff802becab>] sysfs_add_one+0x3f/0x93
>> >>> [<ffffffff802bf1fe>] create_dir+0x4f/0x87
>> >>> [<ffffffff802bf26b>] sysfs_create_dir+0x35/0x4a
>> >>> [<ffffffff80366f6a>] kobject_get+0x12/0x17
>> >>> [<ffffffff8036708f>] kobject_add_internal+0xc3/0x17e
>> >>> [<ffffffff80367224>] kobject_add_varg+0x54/0x61
>> >>> [<ffffffff802296d6>] __wake_up+0x38/0x4f
>> >>> [<ffffffff80367581>] kobject_add+0x74/0x7c
>> >>> [<ffffffff880cb43e>] :cx23885:i2c_readbytes+0x1ae/0x25d
>> >>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> >>> [<ffffffff803e647a>] device_add+0x85/0x4a4
>> >>> [<ffffffff80366e05>] kobject_init+0x41/0x69
>> >>> [<ffffffff803ebe58>] _request_firmware+0x154/0x30f
>> >>> [<ffffffff880e3a7e>] :xc5000:xc_load_fw_and_init_tuner+0x64/0x293
>> >>> [<ffffffff804ac2c7>] i2c_transfer+0x75/0x7f
>> >>> [<ffffffff880df3ad>] :s5h1409:s5h1409_writereg+0x51/0x83
>> >>> [<ffffffff880e3cea>] :xc5000:xc5000_init+0x3d/0x6f
>> >>> [<ffffffff8806ab0c>] :dvb_core:dvb_frontend_init+0x49/0x63
>> >>> [<ffffffff8806be8d>] :dvb_core:dvb_frontend_thread+0x78/0x307
>> >>> [<ffffffff8806be15>] :dvb_core:dvb_frontend_thread+0x0/0x307
>> >>> [<ffffffff80241392>] kthread+0x47/0x75
>> >>> [<ffffffff8022bc6a>] schedule_tail+0x27/0x5c
>> >>> [<ffffffff8020bc88>] child_rip+0xa/0x12
>> >>> [<ffffffff8024134b>] kthread+0x0/0x75
>> >>> [<ffffffff8020bc7e>] child_rip+0x0/0x12
>> >>>
>> >>> ---[ end trace 01bdacc4ebef05bf ]---
>> >>> kobject_add_internal failed for i2c-1 with -EEXIST, don't try to
>> >>> register things with the same name in the same directory.
>> >>> Pid: 7730, comm: kdvb-fe-0 Tainted: P 2.6.25-gentoo-r6 #2
>> >>>
>> >>> Call Trace:
>> >>> [<ffffffff8036710b>] kobject_add_internal+0x13f/0x17e
>> >>> [<ffffffff80367224>] kobject_add_varg+0x54/0x61
>> >>> [<ffffffff802296d6>] __wake_up+0x38/0x4f
>> >>> [<ffffffff80367581>] kobject_add+0x74/0x7c
>> >>> [<ffffffff880cb43e>] :cx23885:i2c_readbytes+0x1ae/0x25d
>> >>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> >>> [<ffffffff803e647a>] device_add+0x85/0x4a4
>> >>> [<ffffffff80366e05>] kobject_init+0x41/0x69
>> >>> [<ffffffff803ebe58>] _request_firmware+0x154/0x30f
>> >>> [<ffffffff880e3a7e>] :xc5000:xc_load_fw_and_init_tuner+0x64/0x293
>> >>> [<ffffffff804ac2c7>] i2c_transfer+0x75/0x7f
>> >>> [<ffffffff880df3ad>] :s5h1409:s5h1409_writereg+0x51/0x83
>> >>> [<ffffffff880e3cea>] :xc5000:xc5000_init+0x3d/0x6f
>> >>> [<ffffffff8806ab0c>] :dvb_core:dvb_frontend_init+0x49/0x63
>> >>> [<ffffffff8806be8d>] :dvb_core:dvb_frontend_thread+0x78/0x307
>> >>> [<ffffffff8806be15>] :dvb_core:dvb_frontend_thread+0x0/0x307
>> >>> [<ffffffff80241392>] kthread+0x47/0x75
>> >>> [<ffffffff8022bc6a>] schedule_tail+0x27/0x5c
>> >>> [<ffffffff8020bc88>] child_rip+0xa/0x12
>> >>> [<ffffffff8024134b>] kthread+0x0/0x75
>> >>> [<ffffffff8020bc7e>] child_rip+0x0/0x12
>> >>>
>> >>> fw_register_device: device_register failed
>> >>> xc5000: Upload failed. (file not found?)
>> >>> xc5000: Unable to initialise tuner
>> >
>>
>> Attaching new dmesg output anyway since the address offsets have changed:
>>
>> xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)...
>>
>> sysfs: duplicate filename 'i2c-1' can not be created
>>
>> ------------[ cut here ]------------
>>
>> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one+0x3f/0x93()
>>
>> Modules linked in: xc5000 s5h1409 cx23885 compat_ioctl32 videodev
>> v4l1_compat cx2341x videobuf_dma_sg v4l2_common btcx_risc tveeprom
>> videobuf_dvb dvb_core videobuf_core wlan_wep wlan_scan_sta
>> ath_rate_sample ath_pci wlan ath_hal(P) [last unloaded: v4l1_compat]
>>
>> Pid: 13677, comm: kdvb-fe-0 Tainted: P 2.6.25-gentoo-r6 #2
>>
>>
>>
>> Call Trace:
>> [<ffffffff8023019d>] warn_on_slowpath+0x51/0x63
>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> [<ffffffff8029143a>] find_inode+0x28/0x6d
>> [<ffffffff802bea5c>] sysfs_ilookup_test+0x0/0xf
>> [<ffffffff8029156e>] ifind+0x44/0x8d
>> [<ffffffff802bec58>] sysfs_find_dirent+0x1b/0x2f
>> [<ffffffff802becab>] sysfs_add_one+0x3f/0x93
>> [<ffffffff802bf1fe>] create_dir+0x4f/0x87
>> [<ffffffff802bf26b>] sysfs_create_dir+0x35/0x4a
>> [<ffffffff80366f6a>] kobject_get+0x12/0x17
>> [<ffffffff8036708f>] kobject_add_internal+0xc3/0x17e
>> [<ffffffff80367224>] kobject_add_varg+0x54/0x61
>> [<ffffffff802296d6>] __wake_up+0x38/0x4f
>> [<ffffffff80367581>] kobject_add+0x74/0x7c
>> [<ffffffff880cb43e>] :cx23885:i2c_readbytes+0x1ae/0x25d
>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> [<ffffffff803e647a>] device_add+0x85/0x4a4
>> [<ffffffff80366e05>] kobject_init+0x41/0x69
>> [<ffffffff803ebe58>] _request_firmware+0x154/0x30f
>> [<ffffffff880e2a29>] :xc5000:xc_load_fw_and_init_tuner+0x64/0x2ad
>> [<ffffffff804ac2c7>] i2c_transfer+0x75/0x7f
>> [<ffffffff880de3ad>] :s5h1409:s5h1409_writereg+0x51/0x83
>> [<ffffffff880e2caf>] :xc5000:xc5000_init+0x3d/0x6f
>> [<ffffffff8806ab0c>] :dvb_core:dvb_frontend_init+0x49/0x63
>> [<ffffffff8806be8d>] :dvb_core:dvb_frontend_thread+0x78/0x307
>> [<ffffffff8806be15>] :dvb_core:dvb_frontend_thread+0x0/0x307
>> [<ffffffff80241392>] kthread+0x47/0x75
>> [<ffffffff8022bc6a>] schedule_tail+0x27/0x5c
>> [<ffffffff8020bc88>] child_rip+0xa/0x12
>> [<ffffffff8024134b>] kthread+0x0/0x75
>> [<ffffffff8020bc7e>] child_rip+0x0/0x12
>>
>> ---[ end trace 01bdacc4ebef05bf ]---
>> kobject_add_internal failed for i2c-1 with -EEXIST, don't try to
>> register things with the same name in the same directory.
>> Pid: 13677, comm: kdvb-fe-0 Tainted: P 2.6.25-gentoo-r6 #2
>>
>> Call Trace:
>> [<ffffffff8036710b>] kobject_add_internal+0x13f/0x17e
>> [<ffffffff80367224>] kobject_add_varg+0x54/0x61
>> [<ffffffff802296d6>] __wake_up+0x38/0x4f
>> [<ffffffff80367581>] kobject_add+0x74/0x7c
>> [<ffffffff880cb43e>] :cx23885:i2c_readbytes+0x1ae/0x25d
>> [<ffffffff80230ef4>] printk+0x4e/0x56
>> [<ffffffff803e647a>] device_add+0x85/0x4a4
>> [<ffffffff80366e05>] kobject_init+0x41/0x69
>> [<ffffffff803ebe58>] _request_firmware+0x154/0x30f
>> [<ffffffff880e2a29>] :xc5000:xc_load_fw_and_init_tuner+0x64/0x2ad
>> [<ffffffff804ac2c7>] i2c_transfer+0x75/0x7f
>> [<ffffffff880de3ad>] :s5h1409:s5h1409_writereg+0x51/0x83
>> [<ffffffff880e2caf>] :xc5000:xc5000_init+0x3d/0x6f
>> [<ffffffff8806ab0c>] :dvb_core:dvb_frontend_init+0x49/0x63
>> [<ffffffff8806be8d>] :dvb_core:dvb_frontend_thread+0x78/0x307
>> [<ffffffff8806be15>] :dvb_core:dvb_frontend_thread+0x0/0x307
>> [<ffffffff80241392>] kthread+0x47/0x75
>> [<ffffffff8022bc6a>] schedule_tail+0x27/0x5c
>> [<ffffffff8020bc88>] child_rip+0xa/0x12
>> [<ffffffff8024134b>] kthread+0x0/0x75
>> [<ffffffff8020bc7e>] child_rip+0x0/0x12
>>
>> fw_register_device: device_register failed
>> xc5000: Upload failed. (file not found?)
>> xc5000: Unable to initialise tuner
>>
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb@xxxxxxxxxxx
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>
>
don't load i2c-dev
Markus
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
