I had this impression from linuxtv site that TT S-1500 and CI would be supported. Anyway card runs fine - I am receiving 2 satellites with multifeed antenna and I was able to create channels.conf files for both with scan. szap also locks on channels from both satellites. Problem is that the other satellite (Thor) requires Conax card, but when I CI slot it is acknowledged in dmesg by: dvb_ca adapter 0: DVB CAM detected and initialised successfully but now I do not get picture even from free channels anymore. szap still locks alright. Also interesting is to mention that with gnutv -cammenu I am able to get access to cammenu which is in finnish so I assume it is really originating from my conax card. Also when tuning with gnutv (with Conax card in the slot) I get a lock on a free channel and I can watch it then few seconds with mplayer - < /dev/dvb/adapter0/dvr0 command but after these seconds gnutv reports something about CAM (does not look like error or anything like this) and the picture goes black. Have I misunderstood the supported but and have my hopes too high or am I just missing something I need to do first (load some modules or so?) I would appreciate every bit of help since I find little information about this approach, lot more about using a smartcard reader and sc-plugins and other methods... Haven't bothered to plug in my hardware on my second Windows computer, I know only from my digibox that card works and is activated... Heute schon ge"freeMail"t? Jetzt kostenlose E-Mail-Adresse sichern! http://email.freenet.de/dienste/emailoffice/produktuebersicht/basic/mail/index.html?pid=6831
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
