Tim Lucas wrote: > For some reason, when I add the line > options cx23885 card=6 > I can no longer boot the machine successfully. > The machine hangs saying that > > (Ctl-alt-F1) > kinit: No resume image, doing normal boot . . . > (Ctl-alt-F8) > udevd-event[3374]: run-program: '/sbin/modprobe' abnormal exit > > After a while it continues to boot, but the messages go by so fast that > I can't read them. Finally, it just sits on a blank screen. Since > 2.6.24-19 was originally installed and it updated to 2.6.24-21, I am > able to boot into the older kernel and then comment out that line. > > I am pretty sure that HVR1500 is card 6, so I am not sure what is wrong. > I didn't have that problem, the first time I rebooted, but have had > that problem on every succesive reboot. > > Any ideas? Please cc the list in all email, which I've done. Check the /var/log/messages or kern.log files to see what they contain. Or, if the system isn't booting, remove the module from your /lib/modules/`uname -r`/kernel/drivers/media/video/cx23885 dir then boot again. The card won't get initialised by the driver won't exist, then you can install the driver with 'make install' which will install it from your linux-dvb/v4l test tree, then load it at your own leisure with modprobe cx23885 debug=1. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
