2008/8/30 <stev391@xxxxxxxxx>: > --snip-- >> >> Tom > > Tom, > (Jackden please try first patch and provide feedback, if that doesn't work for your card, then > try this and provide feedback) > > The second dmesg (with debugging) didn't show me what I was looking for, but from past > experience I will try something else. I was looking for some dma errors from the cx23885 > driver, these usually occured while streaming is being attempted. > > Attached to this email is another patch. The difference between the first one and the second > one is that I load an extra module (cx25840), which normally is not required for DVB as it is > part of the analog side of this card. This does NOT mean analog will be supported. > > As of today the main v4l-dvb can be used with this patch and this means that the cx23885-leadtek > tree will soon disappear. So step 2 above has been modified to: "Check out the latest v4l-dvb > source". > > Other then that step 4 has a different file name for the patch. > > Steps that need to be completed are: 2, 3, 4, 5, 7, 9, 10 & 11. (As you have completed the > missing steps already). > > If the patch works, please do not stop communicating, as I have to perform one more patch to > prove that cx25840 is required and my assumptions are correct. Once this is completed I will > send it to Steven Toth for inclusion in his test tree. This will need to be tested by you again, > and if all is working well after a week or more it will be included into the main tree. > > Regards, > Stephen > > > -- > Nothing says Labor Day like 500hp of American muscle > Visit OnCars.com today. > > Stephen, I tried first patch. dmesg output no error, but scan channels have some problem. dmesg: [ 38.839807] Linux video capture interface: v2.00 [ 38.875775] cx23885 driver version 0.0.1 loaded [ 38.875840] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 20 [ 38.875862] CORE cx23885[0]: subsystem: 185b:e800, board: Compro VideoMate E650 [card=13,autodetected] [ 39.143579] Linux agpgart interface v0.102 [ 39.250631] uvcvideo: disagrees about version of symbol v4l_compat_ioctl32 [ 39.250636] uvcvideo: Unknown symbol v4l_compat_ioctl32 [ 39.250903] uvcvideo: disagrees about version of symbol video_devdata [ 39.250905] uvcvideo: Unknown symbol video_devdata [ 39.251192] uvcvideo: disagrees about version of symbol video_unregister_device [ 39.251195] uvcvideo: Unknown symbol video_unregister_device [ 39.251283] uvcvideo: disagrees about version of symbol video_device_alloc [ 39.251285] uvcvideo: Unknown symbol video_device_alloc [ 39.251346] uvcvideo: disagrees about version of symbol video_register_device [ 39.251348] uvcvideo: Unknown symbol video_register_device [ 39.251517] uvcvideo: disagrees about version of symbol video_usercopy [ 39.251519] uvcvideo: Unknown symbol video_usercopy [ 39.251544] uvcvideo: disagrees about version of symbol video_device_release [ 39.251546] uvcvideo: Unknown symbol video_device_release [ 39.328432] usbcore: registered new interface driver snd-usb-audio [ 39.448206] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 39.543655] [fglrx] vendor: 1002 device: 9589 count: 1 [ 39.543701] [fglrx] ioport: bar 4, base 0xac00, size: 0x100 [ 39.543708] [fglrx] Maximum main memory to use for locked dma buffers: 2896 MBytes. [ 39.543858] [fglrx] PAT is enabled successfully! [ 39.543883] [fglrx] module loaded - fglrx 8.51.3 [Jul 3 2008] with 1 minors [ 39.859126] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 39.863929] cx23885[0]: i2c bus 0 registered [ 39.864036] cx23885[0]: i2c bus 1 registered [ 39.864839] cx23885[0]: i2c bus 2 registered [ 40.053164] cx23885[0]: cx23885 based dvb card [ 40.286064] xc2028 3-0061: creating new instance [ 40.286068] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner [ 40.286073] DVB: registering new adapter (cx23885[0]) [ 40.286076] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... [ 40.286274] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 40.286281] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 20, latency: 0, mmio: 0xfdc00000 [ 40.286286] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.286691] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 40.286699] ACPI: PCI Interrupt 0000:05:00.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 22 [ 40.286716] PCI: Setting latency timer of device 0000:05:00.1 to 64 [ 42.716115] lp: driver loaded but no devices found [ 42.934521] Adding 1992052k swap on /dev/sda1. Priority:-1 extents:1 across:1992052k [ 42.935589] Adding 2000084k swap on /dev/sdb1. Priority:-2 extents:1 across:2000084k [ 43.497918] EXT3 FS on sdb2, internal journal [ 44.325281] kjournald starting. Commit interval 5 seconds [ 44.331665] EXT3 FS on sda2, internal journal [ 44.331669] EXT3-fs: mounted filesystem with ordered data mode. [ 44.354790] kjournald starting. Commit interval 5 seconds [ 44.355877] EXT3 FS on sda3, internal journal [ 44.355880] EXT3-fs: mounted filesystem with ordered data mode. [ 45.046411] ip_tables: (C) 2000-2006 Netfilter Core Team [ 45.574577] No dock devices found. [ 46.009935] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 46.009966] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 46.009968] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 46.009970] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 48.730549] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 48.730554] apm: overridden by ACPI. [ 49.078261] ppdev: user-space parallel port driver [ 49.644805] audit(1220149807.092:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5537 profile="/usr/sbin/cupsd" namespace="default" [ 100.006374] Marking TSC unstable due to: cpufreq changes. [ 100.026755] Time: acpi_pm clocksource has been installed. [ 100.268256] Clocksource tsc unstable (delta = -131156631 ns) [ 100.441186] NET: Registered protocol family 10 [ 100.442026] lo: Disabled Privacy Extensions [ 102.339539] eth0: no link during initialization. [ 102.341443] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 104.687212] Bluetooth: Core ver 2.11 [ 104.688329] NET: Registered protocol family 31 [ 104.688337] Bluetooth: HCI device and connection manager initialized [ 104.688344] Bluetooth: HCI socket layer initialized [ 104.773233] Bluetooth: L2CAP ver 2.9 [ 104.773242] Bluetooth: L2CAP socket layer initialized [ 104.873602] Bluetooth: RFCOMM socket layer initialized [ 104.873625] Bluetooth: RFCOMM TTY layer initialized [ 104.873629] Bluetooth: RFCOMM ver 1.8 [ 106.832903] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 106.832921] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 23 [ 54.155504] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 54.155510] [fglrx] Reserved FB block: Unshared offset:ff7f000, size:80000 [ 74.864318] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended scan: scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/tw-Taipei > ~/channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/tw-Taipei using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 533000000 2 1 9 1 1 2 0 initial transponder 545000000 2 2 9 1 1 2 0 initial transponder 557000000 2 2 9 1 1 3 0 initial transponder 581000000 2 2 9 1 1 3 0 initial transponder 593000000 2 2 9 1 1 3 0 >>> tune to: 533000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 533000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_1_2:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 545000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 545000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 557000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 557000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 581000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 581000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 593000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 593000000:INVERSION_AUTO:BANDWIDTH_6_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. ----=Jackden in Google=---- --=Jackden@xxxxxxxxx=-- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
