Paul Chubb wrote: > Hi, > a few months ago Miroslav Sustek created a patch for this card > against Markus Rechberger's v4l repository. This patch is attached as > dtv1800.patch. A patched and compiled set of drivers fails on ubuntu > hardy heron 8.04 with lots of symbol errors. Hardy is running 2.6.24.19. > I have attempted to backport this patch to the current v4l tree with > limited success. The driver loads however fails to do anything useful. > My patch is attached as dtv1800h-v4l.patch. > > I *think* the issue is with loading firmware. The tuner-xc2028.c > function check_firmware is passed a frontend without the firmware name - > producing the error shown in the dmesg listing below. If I hack the > function and hardcode the firmware file name, it attempts to load the > firmware but fails when it tries to read back. > > Now that I am totally out of my depth I am not sure what to try next. > Any help will be gratefully received. Don't call cx_write() inside the gpio card setup, you're potentially destroying the other bits, it's risky. + case CX88_BOARD_WINFAST_DTV1800H: + cx_write(MO_GP1_IO, 0x101010); //gpio 12 = 1: powerup XC3028 + mdelay(250); + cx_write(MO_GP1_IO, 0x101000); //gpio 12 = 0: powerdown XC3028 + mdelay(250); + cx_write(MO_GP1_IO, 0x101010); //gpio 12 = 1: powerup XC3028 + mdelay(250); + break; Call cx_clear() and cx_set() instead, for the specific gpio bit (12) that you need. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
