Sent: Thursday, August 07, 2008 8:58
PM
Subject: Re: [PATCH] Add
initial support for DViCO FusionHDTV DVB-T Dual Express
The firmware file is incorrect, if it states only 3 firmware images
loaded then it is wrong (it should be 80). Here is what that line
should read:
[ 154.867137] xc2028 3-0061: Loading 80 firmware
images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Make sure you
are using the correct extract script and follow the
instructions in the
header (script is in the linux/Documentation/video4linux)
Also, the
"new" firmware does work in Australia as this is where I
live...
(Melbourne, and it has been tested against 3 different
transmitters here
[1 of which is Mt Dandenong], with varying reception levels.
The card has
really good sensitivity however it can easily be drowned out if
you have
an amplifier).
If you still have trouble load the following modules
with debug =
1:
cx23885
zl10353
tuner_xc2028
Regards,
Stephen.
Hi Steve
Just got the first chance to revisit this
today.
Extracted the firmware again and this time
all images were present.
Tested with tzap and locked all
Brisbane channels.
Fired up MythTV and tested dual tuner
operation with the HD channels.
I'm currently happily tuned to 7HD for the
afternoon's Olympic events and the performance is simply
stunning.
Many thanks to you, Steven,
Chris and all the developers for doing such a great
job.
Regards
David
