Tim, David,
I like top posting, then I don't have to scroll too far for the main
information.
The firmware file is incorrect, if it states only 3 firmware images
loaded then it is wrong (it should be 80). Here is what that line
should read:
[ 154.867137] xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Make sure you are using the correct extract script and follow the
instructions in the header (script is in the linux/Documentation/video4linux)
Also, the "new" firmware does work in Australia as this is where I
live... (Melbourne, and it has been tested against 3 different
transmitters here [1 of which is Mt Dandenong], with varying reception levels.
The card has really good sensitivity however it can easily be drowned out if
you have an amplifier).
If you still have trouble load the following modules with debug = 1:
cx23885
zl10353
tuner_xc2028
Regards,
Stephen.
----Original Message----
Message: 1
Date: Thu, 07 Aug 2008 15:52:15 +0800
From: Tim Farrington <timf@xxxxxxxxxxxx>
Subject: Re: [PATCH] Add initial support for DViCO
FusionHDTV DVB-T Dual Express
To: David <dvb-t@xxxxxxxxxxxx>
Cc: patrick.claven@xxxxxxxxxxxxxxx, linux-dvb@xxxxxxxxxxx
Message-ID: <489AA9AF.2060803@xxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
The point is that the developers are trying to incorporate Chris's work
into the
main v4l-dvb driver.
Chris's original firmware requirements were:
dvb-usb-bluebird-01.fw xc3028-dvico-au-01.fw dvb-usb-bluebird-02.fw
whereas now it needs:
xc3028-v27.fw
It seems that the "new" firmware doesn't work as of yet for Australia,
for this device.
IIRC, Chris had an "offset" for Australia.
Regards,
Timf
--
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
