Sorry, I didn't explained much... it also took some time to me to understand how it's working... Since xc2028 is the tunner it has no Id information on the code. The id's are on the usb bridge code. You should add your deviece id's at;
/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h and then insert your device at
/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c first the device descriptors (at arround line 1120) and then the device itself, I would try it around line 1418. This last file, has already the include to the xc2028 code and calls the tunner funcions. Looking the code around this lines I guess you will understand how it works.
Albert
/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h and then insert your device at
/v4l-dvb/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c first the device descriptors (at arround line 1120) and then the device itself, I would try it around line 1418. This last file, has already the include to the xc2028 code and calls the tunner funcions. Looking the code around this lines I guess you will understand how it works.
Albert
2008/8/9 zePh7r <zeph7r@xxxxxxxxx>
Albert Comerma escreveu:Thank you for replying Albert.
Just to clarify things...
Xceive chips are just tunners, RF chips, mostly analogue with some digital interface, they don't do anything with usb or comunication with the computer, for this reason you need the dibcom chip, it's a usb bridge + decoder + something else...
To start to develop something you must first be sure of what chips it's using.
If not you can try blindly if modifying the code for the U3000-Mini works or Pinnacle 320cx (dibcom 7700 + xceive2028) work (you just need to add your device usb id's).
Albert
I've been exploring the files downloaded through the mercurial repository and though I have found files which seem like they relate to that purpose in /v4l-dvb/linux/drivers/media/common/tuners (which are tuner-xc2028.c , tuner-xc2028.h and tuner-xc2028-types.h) I can't find any section in the above files with some sort of list of device ID's so as to resemble them. There should be something like an xc2028-cards.c right?
This must seem a noob question but this whole process looks like something someone who's not deeply into this project couldn't do easily..
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
