В сообщении от 4 August 2008 16:29:21 Johannes Michler написал(а):> Hi,>> I recently got an TBS 8920 DVB-S2 card and I'm now trying to get it work> using Ubuntu 8.04.> Since the card wasn't automatcially detected and the list appearing when> loading the cx88xx driver doesn't contain the card I downloaded the drivers> from here: http://www.tbsdtv.com/english/product/PCIDVBS2.html> I compiled and installed the drivers as descripted, and after a reboot the> card was propely detected.> My satelitte configuration is as follows: I've got a monoblock LNB, with> Hotbird13 on "A" and Astra19 on "B"> doing a "scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Hotbird" reports> me a lot of channels. But the diseq signal is being ignored, when doing> "scan -s 1 Hotbird" I get the same channels and doing "scan -s 1 Astra"> gives me no channels (scan is aborted after a view seconds, saying it> cannot do initial tuning)> dmesg tells someting about sending 18V and 13V, but this seems to be> informative messages only.> Did someone here succeed in getting this card to work? Or is there another> card which is "equal" to this card. I don't now unfortunately what TBS> changed in there linux driver, this doesn't seem to be documented. The> cx88-cards.h entry for my card is as follows:>>> [CX88_BOARD_TBS8920] = {>> .name = "TBS DVB-S/S2",>> .tuner_type = TUNER_ABSENT,>> .radio_type = UNSET,>> .tuner_addr = ADDR_UNSET,>> .radio_addr = ADDR_UNSET,>> .input = {{>> .type = CX88_VMUX_DVB,>> .vmux = 0,>> },{>> .type = CX88_VMUX_COMPOSITE1,>> .vmux = 1,>> }},>> .mpeg = CX88_MPEG_DVB,>> },>> Any help would be appreciated,>> best regards> JohannesHi Search the problem in cx24116 module, not in cx88-dvb. best regardsIgor _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
