> >>>> http://liplianindvb.sourceforge.net/cgi-bin/hgwebdir.cgi/liplianindvb/ > >>>> It works well. I recommend it for your case > >>>> Of course it's not multifrontend drivers > > > > If I use this driver for dvb-s, can I use the normal szap and scan utils > > from dvb-apps repository or should download the szap2 and scan2 from > > somewhere? > > > > Mika > > Considering this driver is using multiproto, you need userland which is able > to use multiproto, so use szap2 from the same repository :) yes, you're right - you should use dvb-application with multiproto support - vdr 170, szap2 from that repo. But old application should work correctly with this driver too, but only with dvb-s. > I've just updated my working copy of this repository, and got a > WINTV-NOVA-HD-S2 to work, or at least, to some point where it looks like it > works with DVB-S2. I tested it with some conf : > more Astra-19.2E.conf > Anixe HD:12722:h:1:22000:1023:1027:10203 > Astra HD Promo:11914:h:1:27500:1279:1283:131 > > before the commit from last sunday : > szap2 -a 2 -x -S 1 -c ./Astra-19.2E.conf "Anixe HD" > reading channels from file './Astra-19.2E.conf' > zapping to 1 'Anixe HD': > API ver 3, delivery DVB-S2, modulation QPSK > sat 1, frequency 12722 MHz H, symbolrate 22000000, coderate auto, rolloff > 0.35 > vpid 0x03ff, apid 0x0403, sid 0x27db > using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' > ioctl DVBFE_SET_DELSYS failed or not supported: Invalid argument > status 01 | signal c440 | snr 0000 | ber 00000000 | unc 00000000 | > ^C > > after : > szap2 -a 2 -x -S 1 -c ./Astra-19.2E.conf "Anixe HD" > reading channels from file './Astra-19.2E.conf' > zapping to 1 'Anixe HD': > API ver 3, delivery DVB-S2, modulation QPSK > sat 1, frequency 12722 MHz H, symbolrate 22000000, coderate auto, rolloff > 0.35 > vpid 0x03ff, apid 0x0403, sid 0x27db > using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' > status 00 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | with scan2 you should use -C and -M parameters too ! Goga _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
