I have now found that the E800 card is not supported (http://www.linuxtv.org/wiki/index.php/DVB-T_PCIe_Cards). I am willing to test any code and have so far patched the v4l-dvb and the card semi-works...ie I can run the scan using local au-perth.conf file but I am unanle to sync. FYI - I am runnign mythbuntu 8.04. On Thu, Jul 24, 2008 at 01:03:42AM +0800, Thomas Goerke wrote: > I have purchased a Compro E800F Hybrid D/A HW2 PCIe card. The chips on the card include: > Conexant PCIe A/V decoder: CX23885-132 > Conexant MPEG II A/V/Encoder CX23417-11Z > Zarlink ZL10353 Demodulator > Xceiver XC3008ACQ Video Tuner > I have tried a number of solutions including building the latest copy of v4l-dvb and using the cx23885 module with card=4 option. > The problem I am having is that the lgdt330x module is being loaded with the cx23885, however my demodulator is the zarlink ZL10353. I am not sure on how to proceed. Please see below for output of lspci -vvnn. > > 03:00.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:8852] (rev 02) > Subsystem: Compro Technology, Inc. Unknown device [185b:e800] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M] > Capabilities: [40] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 > Link: Latency L0s <2us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] Vital Product Data > Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > > Any help appreciated. > > Thanks > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
