--- Begin Message ---
Tobias Stoeber wrote:
Hi Tim,
well if its an TS it should look similiar like this (saying something
like "TS demuxer" etc.
Playing /tmp/ProSieben_13.10.07-04.32.27.mpeg.
Cache fill: 0.00% (0 bytes) TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=305)AUDIO MPA(pid=306) NO SUBS (yet)! PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 306), video: 10000002(pid
305)...POS=23688
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 15000.0 kbps (1875.0
kbyte/s)
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [libmad] libmad mpeg audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
==========================================================================
ID_FILENAME=/tmp/ProSieben_13.10.07-04.32.27.mpeg
ID_VIDEO_FORMAT=0x10000002
ID_VIDEO_BITRATE=15000000
ID_VIDEO_WIDTH=720
ID_VIDEO_HEIGHT=576
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=1.3333
ID_AUDIO_CODEC=mad
ID_AUDIO_FORMAT=80
ID_AUDIO_BITRATE=192000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
ID_LENGTH=2
Cheers, Tobias
Hi Tobias,
Yes, that first one worked fine (even with all the frame data).
I can see that it's:
VIDEO MPEG2(pid=305)AUDIO MPA(pid=306) NO SUBS (yet)! PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 306), video: 10000002(pid 305)...POS=23688
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 15000.0 kbps (1875.0
kbyte/s)
in mine, so that must mean that all is ok through the system - it is a
MPEG2-TS stream
being dumped to file.
Now to figure out how to install replex!
Very many thanks for your help,
Tim Farrington
--- End Message ---
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
